What did you do TO your Jeep JL today?

[frank-o]

Sanded primed and painted. Even though i used the mopar paint its a shade lighter or so then the vehicle which im kinda bummed about. But they came out awesome

Nice work!

 

[jlewissystem]

Did a quick ride in the hills above the house to see how the rock lights and KC lights perform. I know people love pics so here they are.

And the "Safety Dance" to boot!!

 

[YippieKiYayMrFalcon]

Frontrunner tailgate table install. overall, pretty happy with it. I did have to drill out one of the holes in the bracket a little, but it’s a solid product once it’s on.

my only disappointment is that it doesn’t leave enough room under it for my Mopar cargo mat to fit when I close the tailgate, so I have to figure something out there.

 

[jlewissystem]

Couple small things:

1) Tried the RK 4.5" springs on our MC GC 3.5 lift....ended up swapping all springs back to the MC 3.5 springs. In the rear, it created a rake. In the front, the springs never seemed to sit perfect for me on top. Selling those, if interested - https://www.jlwranglerforums.com/forum/threads/rk-4-5-springs-2-full-sets.68458/

2) Also tried the Desert Does It front seat jackers. We used the full inch, so both pieces of the product. First off, we really like the new position of the seat. It feels way different, but seems better on the back. We'll need to drive it a while to see if we need to lower to the .75", but we're happy with the first impression. The bad - @DesertDoesIt - when i bought 1 item for $100 , i assumed it was for both front seats. I was wrong, so $200 for 2 seats. Looks like only the drivers seats in our Jeeps will have the jackers and the passengers will have to be jealous. I honestly am not going to spend $100 a seat. As a consumer, this should be $100 for a pair. Anyway, here's a few pics:

Before:

After:

I did take a pic from the passenger door looking in, to compare the seat angles, but it didnt pickup too well in the pics.

 

[mbaglole]

Attempted to install the LoD passenger destroyer rock slider. Doesn't fit - so we need to bore out the holes for the screws beside the washers (funny enough, went over the body holt washers with no issue).

So, we started the shorty bumper install - now, waiting on one last part so we can put the tire carrier on.

 

[xaugievike]

Attempted to install the LoD passenger destroyer rock slider. Doesn't fit - so we need to bore out the holes for the screws beside the washers (funny enough, went over the body holt washers with no issue).

So, we started the shorty bumper install - now, waiting on one last part so we can put the tire carrier on.

Do you have reverse sensors on the stock rig? curious how those work with that LOD bumper.

 

[mbaglole]

Do you have reverse sensors on the stock rig? curious how those work with that LOD bumper.

We went for a test drive and it said 'clean sensors' - then while reversing into the garage they worked like stock. Let me get some more time with them and I can comment on longer term

 

[TP1]

Couple small things:
2)@DesertDoesIt - when i bought 1 item for $100 , i assumed it was for both front seats. I was wrong, so $200 for 2 seats. Looks like only the drivers seats in our Jeeps will have the jackers and the passengers will have to be jealous. I honestly am not going to spend $100 a seat. As a consumer, this should be $100 for a pair. Anyway, here's a few pics:

Agreed on the pricing. Had them in my cart and was about to purchase when I realized that pricing was only for a single seat.

 

[NewJLU2019]

New bumpers and side steps for my 4’11” wife. Next week I get the winch installed.

Hello, did the Factory LED fog lights fit the bumper, and what front bumper is that?

Thanks

 

[moonbeam55]

Baby got christened & a new name was bestowed upon her!!!!

 

[BadA$$Rubi]

Finally got a warm day to install my Synergy TR, DL, & Fox ATS SS. It’s a good day.

 

[D90John]

Installed Metal Cloak DEF tank guard on my JLUR diesel today. Easy install to protect the tank and exhauST. I didnt loose much much clearance either.

 

[RobAmy]

I installed the fixed 1 1/4" fixed seat jacker that was redesigned for a better look. DesertDoesit was very kind sending me out a set of the redesigned jackers at no cost to me. This was due to the fact I made my own plastic covering for a better look for my taste which lead them to the redesign.

I think it looks 100% better than the original. I installed this set on my passenger side and I have the adjustable full 1" installed on my drivers side. I have not tested out the feel of the new one yet. It does feel different from the 1" for sure just by sitting on it. I will post back once I test the comfort out a bit.

Here is the original look of the adjustable installed on the drivers side

 

[melendez69]

Baby got christened & a new name was bestowed upon her!!!!

'sssuuuuup...

 

[Flanman]

Hello, did the Factory LED fog lights fit the bumper, and what front bumper is that?

Thanks

It’s a Fishbone Mako bumper and I chose it because the factory LED fog lamps fit without modifications.