Silverblkrilla
Well-Known Member
Installed the Fox TS stabilizer. Helped some on the bumpy road by my house and matches my shocks. Got rid of some of the bump steer.
Last edited:
Looks like you installed in stock location? Looks like you have an upgraded tie rod...did you not want to install to it? Just curious as I don’t know if one location better than the other. Did you do yourself and if so any tips? Do you have to torque tighten the bolts or just “tighten till tight enough”? Got my TS stabilizer on the way.Installed the Fox TS stabilizer. Helped some on the bumpy road by my house and matches my shocks.
I didn’t install it. My lift has been on around 500 miles and the shop had to re-torque everything and they had the Fox TS in house from a build that went another direction, so they installed for free with the purchase. I have the oem tie rod for now but will be going with the Rusty’s steering set up here in the next few months which comes with the flip kit and will flip it then, to get it out of the way of rocks.Looks like you installed in stock location? Looks like you have an upgraded tie rod...did you not want to install to it? Just curious as I don’t know if one location better than the other. Did you do yourself and if so any tips? Do you have to torque tighten the bolts or just “tighten till tight enough”? Got my TS stabilizer on the way.
Looks good
Very nice. Did you modify it yourself or does it come with the backup sensors and lights on sides? I was looking at one last year and it looks different then yours.Finally got my ARB rear bumper installed today.
This is the Australian version, and I noticed it looks different to the US version. This is the standard version on this side of the ocean, didn't have to do any modifications.Very nice. Did you modify it yourself or does it come with the backup sensors and lights on sides? I was looking at one last year and it looks different then yours.
Hollister Hills can be so much fun!Mounted and got to use the new winch this weekend. Modified my hi-lift mounting to clear the winch relays. The frame twister at hollister hills gets me every time it's muddy out there. Winch pulled us right out.
What brackets are those lights mounted on?Finished it up, nice and bright.
They are from Ace Engineering.What brackets are those lights mounted on?
I haven't seen the bronco thread in a while now.I can see an entire thread dedicated to piss poor marketing decisions.
Swapped out useless stock rear console tray, for cup holders!
https://www.amazon.com/gp/product/B08B1BQ3YM/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Fits great, but bottom 2 screws were a bit tougher than expected to remove/thread back in blindly. Nonetheless, totally worth it for $20!
Does it interfere with putting the rear seats down flat?
I actually reneged on how I feel about this rear cup holder, and just REMOVED it.Partially a tad. I have dogs in back almost 100% of the time so I don't put my back seats down.
Check out this video @8:18 marker for visual of how much it goes down: