What did you do TO your Jeep JL today?

[Chs2124]

On top of the door lock blackout caps, I also received the front and rear bump stop spacers from Metalcloak, that i forgot would be needed when removing the Dynatrac lift. I wanted to keep that kit complete for the next user. Now it's just a matter of seeing how many are needed, with the help of my trusty fork attachment.

I also got their front track bar to replace the SteerSmarts one. It was unfortunately hitting the ARB front diff cover.

Where did you buy the door lock blackout caps from?

 

[pittpanther]

Installed the Mopar stainless steel pedal kit (Part No. 82215335AC).

Hot Tip: submerge the pedal covers in piping hot water for a couple of minutes to soften the rubber. They will snap into place a lot more easily.

This Siding Removal Tool really made it easy to install the clutch and brake pedal covers for me.

 

[drvn]

Nice, do you use it often? Worth the $$$?

I personally use it multiple times a week. 99% of mileage is on road. Valuable offroad of course. I use it a lot when parking. To me def worth the money

 

[mygreenkaw]

Yesterday installed Arcus bumper and Apex winch. Today hitch reciver, mopar harness arrives Tuesday not really looking forward to that install.

 

[gumbyhoss]

Wanted a low profile license plate mount for the new front bumper set up. Went with AEV and couldn't be happier. Way cleaner look than the flip up varieties, but still easy to pop off when I need it.

 

[Headbarcode]

Where did you buy the door lock blackout caps from?

A fellow JL owner who does 3d printing and wanted to do something for the Jeep community. He charges little more than what the material, his time, and shipping costs. I also got his obd2 port cover. I don't know how to do links, but he's on Etsy, his name is Joe, and his company name is ClickOnPC.

 

[hoag4147]

A fellow JL owner who does 3d printing and wanted to do something for the Jeep community. He charges little more than what the material, his time, and shipping costs. I also got his obd2 port cover. I don't know how to do links, but he's on Etsy, his name is Joe, and his company name is ClickOnPC.

https://www.etsy.com/shop/ClickOnPC

 

[Chs2124]

https://www.etsy.com/shop/ClickOnPC

Thanks everyone!

 

[Gellie]

Took a year to get the itch: Really happy I went with the red. Great contrast! Next up Diode clear side markers .

 

[melman8r]

Could u kindly give links for each of those components?

Here you go, the mount may vary based on your spare tire holder, mine is the Heavy duty MOPAR factory one which already has a hole for the CB stud to bolt on. I added the quick disconnect to make it easy on and off when going through the touch-free car wash.

https://www.amazon.com/Forever-Wave...599418095&sprefix=forever+wave,aps,245&sr=8-1

https://www.amazon.com/FireStik-K-1...s=firestick+cb+antenna&qid=1599418204&sr=8-16

https://www.amazon.com/Firestik-KW-...DPJWJEESBAH&psc=1&refRID=K568WB52NDPJWJEESBAH

https://www.amazon.com/Forever-Wave...34&sprefix=forever+wave+trump+,aps,217&sr=8-1

https://www.amazon.com/Firestik-K4R...eywords=k-4+stud+mount&qid=1599419146&sr=8-17

 

[Headbarcode]

Took a year to get the itch: Really happy I went with the red. Great contrast! Next up Diode clear side markers .

Maximus3 really makes some great products. Their use of 2.5" tubing is what originally drew me to them. Most others use 2", which always looked a bit off to me. A half inch doesn't seem like much, but it looks more proportionate to the vehicle as a whole.

 

[Headbarcode]

https://www.etsy.com/shop/ClickOnPC

There it is. Thanks buddy!

 

[ChattVol]

Great weather in East TN....took off the top and put on the spider web shade. Went wheelin at a new spot 10 min away with killer views.

 

[melman8r]

Here you go, the mount may vary based on your spare tire holder, mine is the Heavy duty MOPAR factory one which already has a hole for the CB stud to bolt on. I added the quick disconnect to make it easy on and off when going through the touch-free car wash.

https://www.amazon.com/Forever-Wave-Antenna-Sleeve-Mount/dp/B014345H10/ref=sr_1_1?crid=3TNPFU3FUVVHN&dchild=1&keywords=forever+wave+flag+sleeve&qid=1599418095&sprefix=forever+wave,aps,245&sr=8-1

https://www.amazon.com/FireStik-K-1...s=firestick+cb+antenna&qid=1599418204&sr=8-16

https://www.amazon.com/Firestik-KW-...DPJWJEESBAH&psc=1&refRID=K568WB52NDPJWJEESBAH

https://www.amazon.com/Forever-Wave-Donald-Trump-2020/dp/B07VM9CBKL/ref=sr_1_1?crid=2GR9E8OS7BB75&dchild=1&keywords=forever+wave+trump+flag&qid=1599418834&sprefix=forever+wave+trump+,aps,217&sr=8-1

https://www.amazon.com/Firestik-K4R...eywords=k-4+stud+mount&qid=1599419146&sr=8-17

@drvn
You can buy additional flags at foreverwave.com, they have over 100, all types and styles. The sleeve pictured shows tie-wraps from Amazon, mine is the updated one with rubber grommets top and bottom that hold the flag in place. One additional note, I had to apply blue threadlocker to the cb antenna where it screws into the quick disconnect piece because the flag was unscrewing itself when flapping in the wind. I took it for a test ride today, all is good. After the election, I will switch out to my American Flag.

 

[cosine]

Great weather in East TN....took off the top and put on the spider web shade. Went wheelin at a new spot 10 min away with killer views.

awesome view. i gotta go back to tn and look around again, since that is one state i would consider in moving to.