What did you do TO your Jeep JL today?

[Jeeporama]

Installed Rokblokz mud flaps. Keeps my doors scratch free and since I've changed the stock Rubicon rails, I got them without the holes in the flaps.

 

[NewJLU2019]

Thats bringin the heat !

Well higbyz, 70 today Sunny light winds. Already had Half-doors on so the lady and I went for a nice ride for a few hours. Saw quite a few Jeepers and waved a lot. Little sunburnt but still nice day !! Stay Safe and don't slip on that ice. Mother Nature is cruel sometimes in May.

 

[F800]

I picked up my 2020 Sport s less than 48 hours ago - today, I installed rubicon Rock Rails! Slowly building up. Waiting on short antenna and floor mats - next purchase (or build) tailgate table!

 

[Moto_21]

Well decided to relocate my arb compressor and air tank and add another 2 gallon. I did not expect to have to dismantle the entire compressor to change the fitting style to something i could use. Figured 3 hours this morning id have it all done....not. 10 hours later i got it all finished. Just need two more fittings to relocate the quick connect and then it will be finished. Looks much cleaner now. Dont mind the large ass wire loom, i didnt feel like cutting and splicing into them all again

 

[Ed Teach]

Added Dynatrac 2" lift to my overland build today, there is about half inch to spare from my 7-ft garage door opening to the top of my Jeep. I don't want to park outside, guess no more lift and 37 for me!

I am looking at the same lift and adding 35s. How are you liking it so far?

 

[plex]

I am looking at the same lift and adding 35s. How are you liking it so far?

They are running a promotion now, so definitely worth it.

 

[m3lover1]

Yesterday along with my uncle took a road trip to pick up roof top tent and awning and have it mounted up on my rack. I bought them both back on Black Friday lol. I'm sure the shop owner is really glad I finally got it out of his shop lol.

 

[Firemadz]

Drove to Massachusetts for the weekend to purchase a used hard top from a fellow forum member for my daughter’s JLU. Screw the governors and their stay at home orders.

 

[tonygiotta]

Finished up the poison spyder crawler bumper and tire carrier. What a pain in the arse.

Really should have mounted those backup lights while you were at it. Now you’re going to have to do it again someday! Lol

Looks nice BTW!

 

[Kripas]

got the windows tinted and had it ceramic coated.

What kind of off road lights are those on your bumper Hoop bar?

 

[tonygiotta]

Well decided to relocate my arb compressor and air tank and add another 2 gallon. I did not expect to have to dismantle the entire compressor to change the fitting style to something i could use. Figured 3 hours this morning id have it all done....not. 10 hours later i got it all finished. Just need two more fittings to relocate the quick connect and then it will be finished. Looks much cleaner now. Dont mind the large ass wire loom, i didnt feel like cutting and splicing into them all again

Just curious, what do you use all that capacity for? A lot of thought and effort invested in that system!

 

[ElvisJL]

Installed a 2.5" Clayton Offroad Overland lift kit w/ Fox shocks, Dana 44 with limited slip, and JKS quick disconnects.

 

[cactusflier]

Put Pixeldecals decals on both sides. The flat black on the granite crystal gave it a stealth look, disappears at different angles.

 

[higbyz]

Finished up the poison spyder crawler bumper and tire carrier. What a pain in the arse.

Gotta love the plate !

 

[melendez69]

I figured I'd try these ATP billet grab handles. The install video mentions they fit with the logo on the end caps up or down, but with logo down there are 2 bolt holes staring me in the face & I don't know what they're for. They come with 8 long bolts in 2 sizes.; the longer ones are for the front, so I'm guessing the bolt holes on the other end cap are for the shorter bolts for the rear on a 4-dr.*

Yeah, the rhino is kinda manly-looking, but I prefer logo down like a golf club grip. I don't want to see exposed bolt holes so I'll plug them with some Sugru. I go no-logo.

I like the look, but the fit is good, not great. The vertical piece fits flush. The end caps aren't as flush, but you can't slide anything into what appears to be a gap. They meet the A-pillar on the inside. I'd prefer the bolts to be more recessed so they're less exposed. Oh, and they're way overpriced at $140. Yes... one hundred-forty US dollars.

*Update > > > According to ATP, the bolt holes are for accessories.... but I'm not sure what accessories could be bolted to a grab handle.