What did you do TO your Jeep JL today?

[Jeepers!]

Finished installing my 2M/Ham radio in my Retro Fab overhead mount.

Do you have a link? Can't find them online. Particularly the antenna mount.

 

[Maverick909]

Fresh Amber LED fogs. Man they seem pretty good so far. Made by Xprite. 40 bucks for the set.

 

[Dank]

Do you have a link? Can't find them online. Particularly the antenna mount.

No web site, it's a small home shop. I can give you his phone number if you private message me. He is in Fallbrook California.

 

[Dank]

The antenna mount is actually from Rugged radio, the overhead mount is from Retro Fab

 

[Fire Burns]

Leaving it white on the inside does nothing for heat transfer.. On the outside its already black.. the heat wont stop because it hits another color....If you want less heat, I would suggest painting the outside white.

Chill homie. Agree to disagree on the potential for more heat in the cabin due to the addition of black Plastidip on the headliner. There are far more ways that heats enters the cabin than just from the top, to include direct heat through the glass and radiated heat from just about every other surface. What's more important however is that you enjoy your mod. Again, let us know here if you notice much difference in temps. Living in Las Vegas, I doubt another degree or two will affect you much, and to be sure, a few degrees is probably all we're probably talking about anyway. Also let us know if the Plastidip seems to have any sound reducing qualities to it. Genuinely curious about that one.

 

[Cdnjeep]

what kind roof rack are you using. Does that roof rack can hold your RTT, Static and Dynamic??

Roof rack is mopar. Got it 50 percent off with a Costco copoun for buying through the auto program.. and yes for both question. Have no issues with weight while moving..

 

[Roky]

Got these today, 40.00 each at the Amazon.

Been looking for something high and tight. I like the hinge mount and A Pilar mount mirrors but I wanted something closer to the Jeep. These are cheap at least in quality, but I don’t care, this is what I wanted. I cut down and formed the hose clamp to shape of grab bar beings it’s not round. The clamps come with rubber sleeves which is great for not scratching up the grab bar as well.

you can run them this way.......

Or you can run them this way if trail gets tighter....

And if it gets really tight , they have break-away capability......

I actually saw these on another members rig, but it was summer, and you don’t take the top off then unless you like sitting in a frying pan.......

 

[Drytellsr]

Got my cracked windshield replaced and my Smittybuilt side rails will be in today. Its Gonna be a good weekend

 

[JO DYRT]

I have the same radio, but I installed in on the right-side of the passenger foot well.

Have the same radio but mine is hidden. I will have to post pics later.

 

[MadDog27]

Light and cheap $3 mod for the door hinges

Whats the purpose of the hinge cover? Is it just for cosmetic?

 

[Dank]

Do you have a link? Can't find them online. Particularly the antenna mount.

This is the part number for the antenna mount. its from Rugged Radio (.
https://www.ruggedradios.com/index.php?main_page=advanced_search_result&keyword=Jeep+JL&x=14&y=16)
Part #MT-ANT-JEEP

 

[AZ Hella]

Got these today, 40.00 each at the Amazon.

Been looking for something high and tight. I like the hinge mount and A Pilar mount mirrors but I wanted something closer to the Jeep. These are cheap at least in quality, but I don’t care, this is what I wanted. I cut down and formed the hose clamp to shape of grab bar beings it’s not round. The clamps come with rubber sleeves which is great for not scratching up the grab bar as well.

you can run them this way.......

Or you can run them this way if trail gets tighter....

And if it gets really tight , they have break-away capability......

I actually saw these on another members rig, but it was summer, and you don’t take the top off then unless you like sitting in a frying pan.......

Do you have a link for the mirrors? Thanks

 

[Roky]

Do you have a link for the mirrors? Thanks

I’m still learning how to do that yellow letter link thing, lol, hard to teach an old caveman new technology......... , if you go on the Amazon here’s a picture of it.......

There’s other options, but this is the only one that the clamps adjust small enough to fit the grab bar.

 

[RagTopDeluxe]

I’m still learning how to do that yellow letter link thing, lol, hard to teach an old caveman new technology......... , if you go on the Amazon here’s a picture of it.......

There’s other options, but this is the only one that the clamps adjust small enough to fit the grab bar.

Caveman .

If you click on the square with the arrow by the upper right of the image, a dialogue will appear with the option to “Copy.” Click “Copy” to copy the link and then paste it in your post.

PS: I’m curious if your mirror set up vibrates. I’m going to get new mirrors.

 

[SRQgunner]

Light and cheap $3 mod for the door hinges

@Melny67 where can I find these?