What did you do TO your Jeep JL today?

[Bubsjeep]

Finally got my Ace Engineering Trail Doors in and Installed. Really happy with the look and perfect timing as we have some cooler weather in Fl currently, hope it lasts.

Couple of things, that looks really cool. Is that a hard top with no side windows? Also I'm from Michigan in New Smyrna beach for the week. I've heard pros and cons about driving on the beach would like your opinion.

 

[slainte06]

Couple of things, that looks really cool. Is that a hard top with no side windows? Also I'm from Michigan in New Smyrna beach for the week. I've heard pros and cons about driving on the beach would like your opinion.

This is the Sky Touch Roof. This is how it looks when naked. You cannot remove the complete top, some videos out there showing that you can, but not recommended due to aligning system back in track etc. I am in Jacksonville Florida, lots of great driving beaches around here. I have never deflated etc, just use common sense, to be honest never use 4WD much either on beach if not needed. Enjoy your vacay!

 

[INCRHULK]

I picked up a used (but like new) Fishbone Mako stubby from a member of my local club on Friday, wheeled on Saturday and installed the new bumper Sunday.

 

[Jjirish]

I got new shoes. Literally. To keep in Her Highness instead of spare flips...

 

[Mtenna99]

Installed the outback adventure tailgate table. Scored it used for $200. This thing is awesome!!!

 

[Dyolfknip74]

I picked up a used (but like new) Fishbone Mako stubby from a member of my local club on Friday, wheeled on Saturday and installed the new bumper Sunday.

Great choice! Where in Ont are you?

 

[Mike921921]

I got new shoes. Literally. To keep in Her Highness instead of spare flips...

Should print 'Money Pit' across the toes

 

[DEdney1775]

GO BLUE!!!! awesome grill...did you get it local

Thanks! Yes, I love this grill!! It was a local, (here in Baton Rouge, LA) custom made pit just for me, thanks to the father in law..

 

[Roky]

Washed it, it’s been a minute………

 

[JMGT25]

Installed Hi-Lift roll bar rails for the jack. Jack will probably remain pristine throughout the Jeep’s lifetime but tucks up nicely out of the way and no rattles. There are accessory mounting options also for future “stuff”.

Install is around an hour, used a carbide bit to start and the stepped bit for the rest. Template has a driver side and passenger side for the off center seatbelt bung at the top of the side roll bar.

The nutserts were easier to install with the double wrenches vs my nursert tool with the hardtop restricting access. Good quality with easy to follow instructions.

Where did you get the rubber mats that cover the back of the seats?

 

[JMGT25]

Rugged Ridge sills
weathertech floor mats
foot pedal covers
door pocket cupholder
Ram mount
console pockets
trim rings
phone cord?

Bingo!

Are the Rugged Ridge sills a hard plastic feel or a rubbery feel?

 

[NonHypenatedAmerican]

you really need to get some terminal end insulation caps on those wires. similar to the link below
https://www.amazon.com/Allstar-Perf...t=&hvlocphy=9011819&hvtargid=pla-568638316790

you really need to get some terminal end insulation caps on those wires. similar to the link below
https://www.amazon.com/Allstar-Perf...t=&hvlocphy=9011819&hvtargid=pla-568638316790

 

[NonHypenatedAmerican]

Installed a new cowl to windshield frame seal to try and combat my wind noise. Nope, didnt fix it. Wind noise sounds low on the a-pillar close the bottom of the windshield frame. Figured the updated design would do it. Ive replaced every seal I can. Last resort is getting a new windshield seal.

 

[Yogi1956]

The

Where did you get the rubber mats that cover the back of the seats?
[/QUO
Those are part of the Mopar cargo mat package.
I added those and the trail rail system after the purchase. I’ll try and find the order with the part numbers.

 

[Yogi1956]

Where did you get the rubber mats that cover the back of the seats?

This should be the correct part number. Was $105

82215185AD​

Molded Cargo Tray ​