What did you do TO your Jeep JL today?

[iamstillvince]

Installed the A-pillar brackets and Rigid D-SS Pro pod lights.

nice, got exact same brackets but need warmer weather to hook em up

 

[Moxo]

I painted the step inserts on my Magnum step bars before installing them today. I like the contrast. What do you think?

 

[Hound Dog]

My low temp record for driving with the top folded back is 27°F. I can say I've done it, but once was enough. Today, on the other hand, was in the mid 50s. That's Sunrider-worthy without additional thought.

Yea, I used to ride the Harley till it got to 20f. Then I got older and wiser. Now I have trouble if it is a chilly morning in July. Shame.....

 

[Moto_21]

Put me a spicer 1350 driveshaft on the rear. I liked it because i didnt have to mess with the pinion nut at all.

 

[drtrdr85]

Finally able to use the Morrflate system! Worked great and easy airing up and down all four tires at once.

 

[Moto_21]

Yeah...im a JT step-brother... but good couple days.
-stubby because i bent my stocky
-3/4“ rear spacers
- @Clayton Off Road rear sway links
-half kit if sound assassins
- @Armorlite Kail flooring.

this mixed with the sound assassin and headlinet has dramatically increased on road comfort by reducing sound fatigue.

I really like the orange accents of the mojave

 

[Kurt0]

I really like the orange accents of the mojave

thanks! im trying to find a usb cable to match it so far no luck.

Its been a great truck and coming out well. It’s one-finger on the wheel stable at interstate speeds and can take 25mph off ramps north of 60. Im enjoying the build.

 

[wibornz]

Ok, the paint has cured enough, dang it!

Satin black mod complete!

'MERICA

I have thought about doing the paint in the grill. I like it.

 

[Firemadz]

thanks! im trying to find a usb cable to match it so far no luck.

Its been a great truck and coming out well. It’s one-finger on the wheel stable at interstate speeds and can take 25mph off ramps north of 60. Im enjoying the build.

search usb cable orange on Amazon. Quite a few came up. No what kind of connection you need on the other end.

 

[MacombRoger]

So yesterday my 2018 got a over the air update... took about an hour. Does anyone know what the update contained? Fixed? Added? I saw other people mentioning it occurring on FB, so someone here has to know right?

Thanks in Advance

 

[obwahn]

So yesterday my 2018 got a over the air update... took about an hour. Does anyone know what the update contained? Fixed? Added? I saw other people mentioning it occurring on FB, so someone here has to know right?

Thanks in Advance

I heard that it adds warp capabilities. Not sure you should test it tho.

 

[JimLee]

So yesterday my 2018 got a over the air update... took about an hour. Does anyone know what the update contained? Fixed? Added? I saw other people mentioning it occurring on FB, so someone here has to know right?

Thanks in Advance

It just displays a warning that your ball joints will be shit soon. That and the warp capabilities mentioned above.

 

[Heimkehr]

So yesterday my 2018 got a over the air update... took about an hour. Does anyone know what the update contained?

I saw other people mentioning it occurring on FB, so someone here has to know right?

This may help.

 

[Clayton Off Road]

Today I finally got around to installing a new Warn Zeon Premium winch with a Rusty’s Winch plate. Other than the reinstallation of the nuts for the inboard bumper mounting bolts, the installation was a cinch.

BTW, if you use this winch plate, plan on using both deep and shallow 18mm sockets. You’ll also need perhaps two 3in and one 8in extension to get those nuts back on. You’ll also do well to tape the bolt so it stays in the socket for mounting. I found getting the nuts started went really fast when doing that. Some masking tape does the trick just fine..

Up next will be a 2.5” lift and either 35s or 37s. I still haven’t decided on tire size or the lift kit but I’m looking at Rock Krawlers XFactor lift or Clayton Offroads Overland kit. The decision on tires will probably be based on whether or not I’m interested in regearing.

Always happy to answer any questions on our products and discounts are available for forum members!

 

[MrMischief]

Finally able to use the Morrflate system! Worked great and easy airing up and down all four tires at once.

I like these things but they always look to be so bulky and something that would just be a giant tangled mess take up way too much space in my 2 door. Do you have any tips/tricks on keeping it clean and tidy when not in use?