What did you do TO your Jeep JL today?

[Army68F20]

installed my sPOD Bantamx Touchscreen and the ARB Solis Intensity lights. Next weekend the KC chase bar goes on the rack in the back. Got black and amber covers coming for the Intensities.

 

[drtrdr85]

Changed the MC 2.5 for the 3.5 springs today. Using my buddy's lift was much easier than doing it in my garage! Also, If anyone is interested in the 2.5 inch MC springs I took off let me know I will be selling them.

 

[JeepersCreepersJL]

Swapped in no-resistor switchbacks today.

Which ones? And do you like them? They work/perform like they're supposed to?

 

[Yellowssm]

Completely filthy after 6000 miles. Swapped out to the k&n since it’s reusable

 

[mazer]

Which ones? And do you like them? They work/perform like they're supposed to?

I picked them up through 'offerup' - from a local F150 owner that couldn't get them to work. I confirmed they were 7443's, spot-tested them with a 12v, and walked away with a pretty good deal.

They work very well. The only unexpected component is that the "switchback" doesn't interleave the white through the amber cycling(*). When the turn signal engages, the white LEDs turn off. The whites return about 1 second after the turn/hazard cut off.

The biggest takeaway is that the turn signal indicator with the switchback LED is now crisp and sync'd with the amber halo rings on the LED headlights and (halo) LED fog lights. The original light would lag quite a bit behind the headlamp/fog light. It was quite noticeable, but now a non-issue.

So overall I really like the bright white, indicators are all sync'd up now, and I'm very happy with the difference.

(*) Although I expected the white to interleave with the amber when the turn signal is engaged, the manufacturer page for the product states that discontinuing the white during the turn signal is intentional for better visibility. I can live with that.

 

[Jebiruph]

I picked them up through 'offerup' - from a local F150 owner that couldn't get them to work. I confirmed they were 7443's, spot-tested them with a 12v, and walked away with a pretty good deal.

They work very well. The only unexpected component is that the "switchback" doesn't interleave the white through the amber cycling(*). When the turn signal engages, the white LEDs turn off. The whites return about 1 second after the turn/hazard cut off.

The biggest takeaway is that the turn signal indicator with the switchback LED is now crisp and sync'd with the amber halo rings on the LED headlights and (halo) LED fog lights. The original light would lag quite a bit behind the headlamp/fog light. It was quite noticeable, but now a non-issue.

So overall I really like the bright white, indicators are all sync'd up now, and I'm very happy with the difference.

(*) Although I expected the white to interleave with the amber when the turn signal is engaged, the manufacturer page for the product states that discontinuing the white during the turn signal is intentional for better visibility. I can live with that.

My Quake headlight RGB halo switchbacks behave the same way. When the turn signal is detected the RGB halo turns off and the amber halo is turned on and off from the turn signal.

 

[bem1]

Completely filthy after 6000 miles. Swapped out to the k&n since it’s reusable

Are there two? Do you have the part number?

 

[mjaga]

Barricade offroad sliders, a little more protection than the factory rubi rails and a step. The 37's make it a bit high for climbing in and out of. No bolt issues thank God.

I'm considering the same ones and also in Sting Grey over here. Could you post another angle, showing more of the JL? Thank you..

 

[ConqSoft]

Are there two? Do you have the part number?

Stock is one piece. The K&N replacement comes in two pieces to make it easier to install since it’s not as flexible as stock.

 

[JO DYRT]

Are there two? Do you have the part number?

Here ya go Amazon

 

[zeebo56]

Completely filthy after 6000 miles. Swapped out to the k&n since it’s reusable

Did you use your ac a lot? I always have my windows down so I'm curious if mine would be filthy at 9k

 

[Crusifix]

Well shit.... 40K miles, and I forgot that I even had a cabin filter...I may need to check that out later today.. haha!

 

[Anthnyslzr7]

Made and installed my own (with some help) custom headliners yesterday afternoon.

 

[BD-YYZ]

Mounted a smaller emergency shovel. I had a small square Stanley there but it was kinda big for the space.

Where do those straps come from?

 

[MichaelAnthony]

Installed the Mopar hinge gate reinforcement until LoD arrives.... oh yea on another note.... had to install another (3rd) license plate holder.... it seems the factory snap in gets easily damaged from Black trails.. and that's my dad in the pic I spend as much time as possible with him... (84)
..