What did you do TO your Jeep JL today?

[SpookyXJ]

Installed the @Bestop Sunrider for hardtop on the other half's Sahara this morning, there are fitment issues not he Drivers side with the fabric. The drivers side fabric is not fitting all the way in the channel and has a decent size gap especially at the rear corner. The passenger side is fine. Anyone else have this issue? The first two photos are the passenger side and the last two are the drivers side.

Your z clip might be in wrong if not then IDK.

 

[weeitsmikelee]

Finally had time to get the exhaust on. Much much louder than expected

 

[Spdu4ia]

looks like a corvette

 

[SpookyXJ]

Installed a Synergy HD tie rod with Fox IFP steering stabilizer and Synergy relocation kit. Drag link is on back order.

 

[weeitsmikelee]

looks like a corvette

Haha doesn’t drive like one though

 

[OMTBiker]

Your z clip might be in wrong if not then IDK.

The z clips are installed correctly, one side is fine the other not so much.

 

[higbyz]

I need to build some ramps like this

I'll say. Long overdue !

 

[cram501]

Installed the @Bestop Sunrider for hardtop on the other half's Sahara this morning, there are fitment issues not he Drivers side with the fabric. The drivers side fabric is not fitting all the way in the channel and has a decent size gap especially at the rear corner. The passenger side is fine. Anyone else have this issue? The first two photos are the passenger side and the last two are the drivers side.

I had a similar problem on the passenger side. I loosed the 2 bolts holding the top down and loosed the 2 bolts where the side and back came together. The two pieces weren't quite fitting together correctly. I made sure the canvas wasn't pinched and played with it until they fit together more snuggly. I did it in place and didn't remove the top.

 

[Warlocke]

Installed a set of new Front Mud Flaps (XL Size) by RokBlokz.

Also installed a set of new Paracord Sound Bar Grab Handles by Bartact.

 

[Bestop]

Installed the @Bestop Sunrider for hardtop on the other half's Sahara this morning, there are fitment issues not he Drivers side with the fabric. The drivers side fabric is not fitting all the way in the channel and has a decent size gap especially at the rear corner. The passenger side is fine. Anyone else have this issue? The first two photos are the passenger side and the last two are the drivers side.

If you've not given our customer service team a call, please do. They are all set up now to work remotely and should be able to help you get it sorted out.

Their number is 800-845-3567 and are in the office between 8am-5pm Mountain Monday through Friday.

- the Bestop team
www.bestop.com

 

[Kenny]

Took advantage of AEV’s buy 4 get 5 Wheel Deal and, of course, while I was at it, I had to get ‘em for my trailer too!!! I love my new Pintlers & yellow center caps!

nice setup

 

[OMTBiker]

If you've not given our customer service team a call, please do. They are all set up now to work remotely and should be able to help you get it sorted out.

Their number is 800-845-3567 and are in the office between 8am-5pm Mountain Monday through Friday.

- the Bestop team
www.bestop.com

Thank you for following up. I contacted support earlier, sent an email with the photos and am awaiting a response.

 

[limeade]

Taught my 16 yr old son how to change the gear oil in the front and rear diffs (Royal Purple 75W90 front and 75W140 rear) and then we installed a Fox 2.0 IFP SS.

On Wednesday, we installed a Warn winch plate, Warn VR EVO 10S winch, Factor 55 1.5" fairlead, and Factor 55 Prolink. We also installed a Metalcloak Sportgate tire carrier and Oracle LED Wheel Ring Brake light. The Sportgate carrier was fairly easy to install and seems very stout. Have had no rattles or tire movement with a 100 lb tire/wheel combo (37" Pats and Vision wheels).

 

[ale70]

Love the look! Getting my 37” Pats today! Cant wait! What lift do you have?

 

[Rad vlad]

KC cyclones hooked up to dome light for some puddle lamps