What did you do to your 2dr today?

[Blue 179]

If I ever go 315 70 17 on my JLR, I was going to go with those spacers. Looks pretty straitforward install. How did it go? Any little tips to make it go smoother?
Also IL, by the WI border. Where u?

I just had a shop do it. I’ve lifted vehicles in the past using my Wife’s extra set of hands. She said just get someone to install it so I did. I’m in the Montgomery/Yorkville area.

Sponsored

 

[trdt44]

Put the warn zeon in my LOD signiture shorty. 0/10 do not recommend. Tight tight fit. Also installed a LOD rear bumper, it was a piece of cake by comparison.

Did a LOD Signature mid today with the Zeon. There was more than a few curse words. Still have the rear to install so that is good to hear. I had painters tape and ram board covering everything because I had heard about the tight fit.

Also got Xpel Stealth PPF installed a month or so ago. I am very happy how it turned out. Also did new 392 bronze badges. Waiting on some Trail Ready bronze wheels.

 

[viper88]

I have seen the leather saddle bags, metal and plastic trays. I am leaning towards the metal ones. Any new suggestions for more storage over the rear wheel wells?

 

[viper88]

Did a LOD Signature mid today with the Zeon. There was more than a few curse words. Still have the rear to install so that is good to hear. I had painters tape and ram board covering everything because I had heard about the tight fit.

Also got Xpel Stealth PPF installed a month or so ago. I am very happy how it turned out. Also did new 392 bronze badges. Waiting on some Trail Ready bronze wheels.

That matte Stealth PPF looks great! I thought about doing that with a black JLR. I ended up going the other direction with white. Can I ask how much it cost to wrap it with Stealth?

 

[Industrialwrench]

Installed my winch today. Used all mopar stuff and the install Suuuuucccckked. Looks good, and it works. So I’m stoked. F doing that again though.

 

[trdt44]

That matte Stealth PPF looks great! I thought about doing that with a black JLR. I ended up going the other direction with white. Can I ask how much it cost to wrap it with Stealth?

I got three quotes that ranged from $6k to $8k. The most experienced place was in the middle so i went with them. It is a lot of work, they had it for five full days.

 

[TheBirdie72]

+ Grab handles!!!

 

[blnewt]

I got three quotes that ranged from $6k to $8k. The most experienced place was in the middle so i went with them. It is a lot of work, they had it for five full days.

Looks like they cut no corners though, so should be worth it! Looks great FWIW

 

[JLR_AEV]

Slapped on the 37's. Loving how level it is now but I hate how the 37 K02's are crowned and thinner than the 315's -_-. Going to continue swapping these and the 35's for the next week to see which ones I am going to stick with. If only there were 37's that were not crowned AND weighed 68 lbs like the K02's

 

[dragoneggs]

Slapped on the 37's. Loving how level it is now but I hate how the 37 K02's are crowned and thinner than the 315's -_-. Going to continue swapping these and the 35's for the next week to see which ones I am going to stick with. If only there were 37's that were not crowned AND weighed 68 lbs like the K02's

Keep us posted. Looking to move up from 33s to 35s on my JLR. Wondering what lift I should do to accompany?

 

[dragoneggs]

Just about finished (or maybe not) with my lighting upgrade/additions. Baja Designs LP4 and Squadrons up front, Oracle tail lights, (sorry no night shots), and KC Cyclones under the hood. Probably add Rocklights underneath, and maybe tailgate lighting sooner than later.

 

[blnewt]

Slapped on the 37's. Loving how level it is now but I hate how the 37 K02's are crowned and thinner than the 315's -_-. Going to continue swapping these and the 35's for the next week to see which ones I am going to stick with. If only there were 37's that were not crowned AND weighed 68 lbs like the K02's

Nice look there, wheels are a perfect match too!
Might look into the Cooper ATS-XLTs, they are 18/32" tread depth, D-rated, and weigh 68lbs
https://coopertire.com/CooperTire/media/PDF/Discoverer-AT3-XLT-Tire-Specification.pdf

 

[JLR_AEV]

Nice look there, wheels are a perfect match too!
Might look into the Cooper ATS-XLTs, they are 18/32" tread depth, D-rated, and weigh 68lbs
https://coopertire.com/CooperTire/media/PDF/Discoverer-AT3-XLT-Tire-Specification.pdf

I will take a look Thank you!

 

[JLR_AEV]

Keep us posted. Looking to move up from 33s to 35s on my JLR. Wondering what lift I should do to accompany?

Will do!

This is the toughest decision so far. I swear its like a placebo
I will just do overlanding and I would be happy with either set up but I just don't like how the 37's have a crown to them

35's
Borah(JL spec) 17x8.5 +25mm offset

37's
Borah(JK spec) 17x8.5 +4mm offset

 

[At Risk Ute]

Yankee Hill, Colorado.

Sponsored