***Warning*** Artec Skid plate, possible fuel line issue?

[blnewt]

Awesome, thank you folks, you’ve taken the sting out of buying that plastic (it was $60 for a 12x12x1.5” square!).
All four all accounted for at this point:
@shotcoach
@blnewt
@Windshieldfarmer
@hardrock_sea
I’ll shoot you each a pm hopefully this evening.

Brad, gonna have to give up my spot, my 2dr doesn't have that plate to drill into, but I think I can come up with something else. Thanks!

Sponsored

 

[BDinTX]

Brad, gonna have to give up my spot, my 2dr doesn't have that plate to drill into, but I think I can come up with something else. Thanks!

Np thanks for the heads up!

 

[blnewt]

Np thanks for the heads up!

Awesome that you came up with such a nice solution that will support those lines even better than they were from the factory!

 

[BDinTX]

Got the roll pins installed and decided to chamfer the edges and switched to stainless hardware. Will PM you guys shortly.

 

[crbrenny]

Got the roll pins installed and decided to chamfer the edges and switched to stainless hardware. Will PM you guys shortly.

also interested in one, I PM'd you

 

[BDinTX]

Hey gents, all items sent out and all have an eta of Monday 8/16. Thanks again!

 

[shotcoach]

Fab

Hey gents, all items sent out and all have an eta of Monday 8/16. Thanks again!

Fantastic! Thanks again!

Sponsored