Upgraded Mopar axle available for 2020 Wrangler Unlimited Willys ?

[morrie]

I have a 2020 Jeep wrangler unlimited willys The original mopar oem is a Dana M186,3.73 gear ratio(dme) w/ TruLOC(dse). This Front axle is on backorder and unavailable. Is their a upgraded mopar axle that is available that could be installed? it has a Dana 220 rear axle.
what would have to be changed to make the bew axle assembly compatable?

Sponsored

 

[Wabujitsu]

I have a 2020 Jeep wrangler unlimited willys The original mopar oem is a Dana M186,3.73 gear ratio(dme) w/ TruLOC(dse). This Front axle is on backorder and unavailable. Is their a upgraded mopar axle that is available that could be installed? it has a Dana 220 rear axle.
what would have to be changed to make the bew axle assembly compatable?

Morrie, here’s one that says the D44 front is in stock. Why not upgrade? https://fusion4x4.com/collections/j...sion-elite-44-front-axle-assembly-for-jeep-jl

 

[fat_head]

I have a 2020 Jeep wrangler unlimited willys The original mopar oem is a Dana M186,3.73 gear ratio(dme) w/ TruLOC(dse). This Front axle is on backorder and unavailable. Is their a upgraded mopar axle that is available that could be installed? it has a Dana 220 rear axle.
what would have to be changed to make the bew axle assembly compatable?

What is broken on your current axle? Is it bent?

 

[morrie]

the axle is broken i wouls like to upgrade it mopar something availablr

 

[fat_head]

the axle is broken i wouls like to upgrade it mopar something availablr

The tube is broken? I've got a m186 housing you can have for free if you can get it from Dallas to TN. Slap all your old guts in it and be back up in no time.

 

[morrie]

Morrie, here’s one that says the D44 front is in stock. Why not upgrade? https://fusion4x4.com/collections/j...sion-elite-44-front-axle-assembly-for-jeep-jl

 

[morrie]

Morrie, here’s one that says the D44 front is in stock. Why not upgrade? https://fusion4x4.com/collections/j...sion-elite-44-front-axle-assembly-for-jeep-jl

Morrie, here’s one that says the D44 front is in stock. Why not upgrade? https://fusion4x4.com/collections/j...sion-elite-44-front-axle-assembly-for-jeep-jl

is this a mopar part

 

[Wabujitsu]

is this a mopar part

I will send you the links, I won‘t read them for you.

 

[Some Random Guy]

You can put a Rubicon axle in, or a Dana Ultimate 44. Both are aftermarket MOPAR. However, both will require new supporting parts. The gear ratio cannot be matched.

I don’t remember if there is an M210 front that comes stock with 3.73 gears that might be useable. I think a diesel rubicon comes with 3.73.
Edit: It looks like the 392 does too. Now, I don’t know how these would potentially ship. It might be in pieces for assembly and install by dealership or with gears already set up.

 

[GrayWolf.Overland]

Mopar sells m210 narrow width axle housings - those intended for diesel Sport/Sahara. It's does not come with ring and pinion gear not the axle shafts.. You can reuse parts based on what is broken.

If you are not doing this on warranty it's better to get fusion or dynatrac d44 front axles in narrow width spec to match your rear d44/m220

Sponsored