YonesYeepOR
New Member
- First Name
- Brent
- Joined
- Nov 24, 2019
- Threads
- 1
- Messages
- 4
- Reaction score
- 1
- Location
- Eugene, OR
- Vehicle(s)
- 2020 Wrangler JLU
Similar but no. When I press the clutch, the revs drop first and then bounce back up about 500-700 above idle, and then back down to idle (when rolling to a stop light). That article explains rev hang to just slowly rev down from the RPMs at the time the clutch is pressed.Is it rev hang as described in this article: https://www.carthrottle.com/post/rev-hang-explained-and-why-petrolheads-hate-it/?
My issue I notice most when I'm in 3rd gear
Sponsored