Torque Values For Jeep JL Wrangler

OP
OP
JAY

JAY

Administrator
Administrator
First Name
Jay
Joined
Jan 13, 2015
Messages
1,915
Reaction score
5,874
Vehicle(s)
Wrangler
Build Thread
Link
Occupation
Admin
Vehicle Showcase
1
FUEL INJECTION

Part|Nm | ft. lbs. | in. lbs. | Comments
Accelerator pedal bolts | 12 | 9 | - |
Crankshaft position sensor bolt | 12 | 9 | - |
Fuel rail bolts | 7 | - | 62 |
Oxygen sensor (downstream) | 43 | 32 | - |
Oxygen sensor (upstream) | 43 | 32 | - |
Throttle body bolts | 9 | - | 80 |
Advertisement

 
OP
OP
JAY

JAY

Administrator
Administrator
First Name
Jay
Joined
Jan 13, 2015
Messages
1,915
Reaction score
5,874
Vehicle(s)
Wrangler
Build Thread
Link
Occupation
Admin
Vehicle Showcase
1
HVAC

Part|Nm | ft. lbs. | in. lbs. | Comments
A/C Compressor oil drain bolt | 10 | 7 | - |
A/C Compressor shaft bolt | 14 | 10 | - |
A/C Condenser to radiator bolts | 5 | - | 45 |
Expansion valve bolts | 11 | 8 | - |
Receiver/drier to condenser bolt | 22 | 16 | - |
Refrigerant lines to A/C compressor | 20 | 15 | - |
Refrigerant lines to A/C condenser | 20 | 15 | - |
Refrigerant lines to A/C expansion valve nut | 20 | 15 | - |
Suction and liquid line assembly to body bolts | 9 | - | 80 |
 
OP
OP
JAY

JAY

Administrator
Administrator
First Name
Jay
Joined
Jan 13, 2015
Messages
1,915
Reaction score
5,874
Vehicle(s)
Wrangler
Build Thread
Link
Occupation
Admin
Vehicle Showcase
1
PROP SHAFT

Part |Nm |ft. lbs. | in. lbs. | Comments
Front driveshaft to front axle flange bolts | 121 | 89 | - | Do NOT reuse these fasteners. If removed, a NEW fastener MUST be installed and tightened to specifications. Torque and secure in a crisscross pattern.
Front driveshaft to transfer case flange bolts | 39 | 29 | - | Do NOT reuse these fasteners. If removed, a NEW fastener MUST be installed and tightened to specifications. Torque and secure in a crisscross pattern.
Rear driveshaft to transfer case flange bolts | 39 | 29 | - | Do NOT reuse these fasteners. If removed, a NEW fastener MUST be installed and tightened to specifications. Torque and secure in a crisscross pattern.
Rear driveshaft to rear axle flange bolts | 39 | 29 | - | Do NOT reuse these fasteners. If removed, a NEW fastener MUST be installed and tightened to specifications. Torque and secure in a crisscross pattern.
 
OP
OP
JAY

JAY

Administrator
Administrator
First Name
Jay
Joined
Jan 13, 2015
Messages
1,915
Reaction score
5,874
Vehicle(s)
Wrangler
Build Thread
Link
Occupation
Admin
Vehicle Showcase
1
RESTRAINTS

Part |Nm |ft. lbs. | in. lbs. | Comments
B-pillar impact sensor nut | 9 | - | 80 |
Clockspring mounting screw | 6 | - | 53 |
Driver airbag to steering wheel bolts | 9 | - | 80 |
Front turning loop height adjuster mounting bolts | 45 | 33 | - |
Front impact sensor nut | 11 | 8 | - |
Front seat belt buckle bolt | 40 | 30 | - |
Front retractor pretentioner bolt | 45 | 33 | - |
Front retractor pretentioner bracket to B-pillar bolts | 26 | 19 | - |
Front retractor to B-Pillar bolt | 45 | 33 | - |
Front seat belt turning loop mounting nut | 39 | 29 | - |
Occupant restraint controller mounting nut | 11 | 8 | - |
Passenger airbag mounting bolts | 18 | 13 | - |
Seat airbag mounting nut | 10 | 7 | - |
Rear center retractor to seat frame bolt | 70 | 52 | - |
Rear center retractor to floor bolt | 70 | 52 | - |
Rear retractor to C-pillar bolt | 32 | 24 | - |
Rear retractor belt to floor nut | 48 | 35 | - |
Rear seat belt buckle to floor bolt | 70 | 52 | - |
Rear seat belt buckle to seat frame nut | 40 | 30 | - |
Rear turning loop to sport bar | 32 | 24 |
 
OP
OP
JAY

JAY

Administrator
Administrator
First Name
Jay
Joined
Jan 13, 2015
Messages
1,915
Reaction score
5,874
Vehicle(s)
Wrangler
Build Thread
Link
Occupation
Admin
Vehicle Showcase
1
STEERING COLUMN

Part |Nm |ft. lbs. | in. lbs. | Comments
Steering wheel nut | 50 | 37 | - |
Steering column nuts | 27 | 20 | - |
Intermediate shaft coupler pinch bolts | 54 | 40 | - | Do NOT reuse these fasteners. If removed, a NEW fastener MUST be installed and tightened to specifications.
 
OP
OP
JAY

JAY

Administrator
Administrator
First Name
Jay
Joined
Jan 13, 2015
Messages
1,915
Reaction score
5,874
Vehicle(s)
Wrangler
Build Thread
Link
Occupation
Admin
Vehicle Showcase
1
STEERING GEAR

Part |Nm |ft. lbs. | in. lbs. | Comments
Adjuster screw lock nut | 45 | 33 | - |
Power steering gear bolts | 133 | 99 | - |
Power steering gear pitman shaft nut | 250 | 184 | - |
Power steering gear pressure line | 28 | 21 | - |
Power steering gear return line | 28 | 21 | - |
 
OP
OP
JAY

JAY

Administrator
Administrator
First Name
Jay
Joined
Jan 13, 2015
Messages
1,915
Reaction score
5,874
Vehicle(s)
Wrangler
Build Thread
Link
Occupation
Admin
Vehicle Showcase
1
STEERING LINKAGE

Part |Nm |ft. lbs. | in. lbs. | Comments
Drag link inner nut (at pitman arm) | 105 | 77 | - |
Drag link outer nut (at steering knuckle) | 64 | 47 | - |
Drag link adjuster clamp | 46 | 34 | - |
Tie rod end nut (at steering knuckle) | 64 | 47 | - |
Tie rod end adjuster clamp | 46 | 34 | - |
Steering damper bolt (at axle) | 80 | 59 | - |
Steering damper nut (at tie rod) | 80 | 59 | - |
Steering damper bracket nut | 75 | 55 | - |
 
OP
OP
JAY

JAY

Administrator
Administrator
First Name
Jay
Joined
Jan 13, 2015
Messages
1,915
Reaction score
5,874
Vehicle(s)
Wrangler
Build Thread
Link
Occupation
Admin
Vehicle Showcase
1
STEERING PUMP

Part |Nm |ft. lbs. | in. lbs. | Comments
Power steering pump bracket to frame | 28 | 21 | - |
Power steering pump to bracket | 8 | 6 | 71 |
Pressure line to pump | 20 | 15 | - |
Power steering hose routing bracket bolt | 6 | 5 | 53 |
Power steering fluid reservoir bolt | 6 | 5 | 53 |
 
OP
OP
JAY

JAY

Administrator
Administrator
First Name
Jay
Joined
Jan 13, 2015
Messages
1,915
Reaction score
5,874
Vehicle(s)
Wrangler
Build Thread
Link
Occupation
Admin
Vehicle Showcase
1
SUSPENSION (FRONT)

Part |Nm |ft. lbs .| in. lbs. | Comments
Hub and bearing bolts | 102 | 75 | - |
Hub and bearing nut | 136 | 100 | - |
Lower control arm rear nut | 140 + 145° | 103 +50° | - |
Lower control arm front nut | 140 + 145° | 103 +50° | - |
Lower ball joint nut (initial torque) | 20 | 15 | - |
Lower ball joint nut (final torque) | 45 | 33 | - |
Shock absorber lower bolt | 100 | 74 | - |
Shock absorber upper bolt | 110 | 81 | - |
Stabilizer bar bolts | 63 | 46 | - |
Stabilizer bar link upper nut | 93 | 69 | - |
Stabilizer bar link lower bolt | 80 | 59 | - |
Track bar frame nut | 70 + 115° | 52 + 115° | - |
Track bar axle bolt | 70 + 115° | 52 + 115° | - |
Upper control arm front nut | 55 + 185° | 41 + 185° | - |
Upper control arm rear bolt | 50 + 135° | 37 + 135° | - |
Upper ball joint nut | 75 | 55 | - |



SUSPENSION (REAR)

Part |Nm |ft. lbs .| in. lbs. | Comments
Lower control arm front bolts | 100 + 50° | 74 + 50° | - |
Lower control arm rear nut | 100 + 50° | 74 + 50° | - |
Shock absorber upper bolt | 110 | 81 | - |
Shock absorber lower nut | 100 | 74 | - |
Stabilizer bar bolts | 63 | 46 | - |
Stabilier bar link upper nut | 90 | 66 | - |
Stabilizer bar link lower nut | 80 | 59 | - |
Track bar nut (frame end) | 100 + 30° | 74 + 30° | - |
Track bar bolt (axle end) | 100 + 60° | 74 + 60° | - |
Upper control arm front bolt | 100 + 80° | 74 + 80° | - |
Upper control arm rear nut | 100 + 65 ° | 74 + 65° | - |
 
OP
OP
JAY

JAY

Administrator
Administrator
First Name
Jay
Joined
Jan 13, 2015
Messages
1,915
Reaction score
5,874
Vehicle(s)
Wrangler
Build Thread
Link
Occupation
Admin
Vehicle Showcase
1
TRANSFER CASE - FULL TIME [SELEC TRAC]

Part |Nm |ft. lbs. | in. lbs. | Comments
Poppet plug | 20 | 15 | - |
Drain / fill plug | 28 | 21 | - |
Case half bolts | 26 | 19 | - |
Output flange nut | 225 | 166 | - |
Transfer case to transmission bolts | 60 | 44 | - |
Shift motor actuator bolts | 12 | 9 | - |
Range position switch | 27 | 20 | - |
Extension housing bolts | 26 | 19 | - |
Range lever bolt | 30 | 22 | - |
 
OP
OP
JAY

JAY

Administrator
Administrator
First Name
Jay
Joined
Jan 13, 2015
Messages
1,915
Reaction score
5,874
Vehicle(s)
Wrangler
Build Thread
Link
Occupation
Admin
Vehicle Showcase
1
TRANSFER CASE - PART TIME

Part |Nm |ft. lbs. | in. lbs. | Comments
Poppet plug | 20 | 15 | - |
Drain / fill plug | 28 | 21 | - |
Case half bolts | 26 | 19 | - |
Output flange nut | 225 | 166 | - |
Transfer case to transmission bolts | 60 | 44 | - |
Shift motor (actuator) bolts | 12 | 9 | - |
Range position switch | 27 | 20 | - |
Extension housing bolts | 26 | 19 | - |
Range lever bolt | 30 | 22 | - |
 
OP
OP
JAY

JAY

Administrator
Administrator
First Name
Jay
Joined
Jan 13, 2015
Messages
1,915
Reaction score
5,874
Vehicle(s)
Wrangler
Build Thread
Link
Occupation
Admin
Vehicle Showcase
1
TRANSMISSION (AUTOMATIC)

Part |Nm |ft. lbs. | in. lbs. | Comments
Engine to bell-housing bolt | 60 | 44 | - |
Extension housing to transmission bolt | 27 | 20 | - |
Manual park release lever shaft nut | 10 | - | 89 |
Manual park release cable to transmission | 20 | 15 | - |
Manual park release grommet to bracket | 9 | - | 79 |
Manual park release lever to transmission shaft | 20 | 15 | - |
Manual park release shield to transmission | 17 | 12 | - |
Output shaft flange nut | 60 | 44 | - |
Output speed sensor bolt | 8 | - | 71 |
Park pawl lock rod guide plate bolt | 10 | - | 89 |
Park pawl shaft plug | 35 | 26 | - |
Shifter assembly bolts | 9 | - | 79 |
Transmission oil pan bolt | 10 | - | 89 |
Transmission oil pan drain plug | 9 | - | 80 |
Transmission oil fill plug | 35 | 26 | - |
Transmission oil pump housing to cover bolt | 5 + 45° | - | 44 + 45° |
Torque converter to flex plate bolt | 55 | 41 | - | Do NOT reuse these fasteners. If removed, a NEW fastener MUST be installed and tightened to specifications. NOTE: If old fastener must be reused, Loc-Tite must be applied to the threads.
Transmission mount to adapater | 30 | 22 | - |
Shift lever assembly to floor pan bolts | 8 | - | 70 |
Transmission shift knob | 2 | - | 17 |
Transfer case shift knob | 2 | - | 17 |
Manual park release to shift lever assembly | 8 | - | 70 |
 
OP
OP
JAY

JAY

Administrator
Administrator
First Name
Jay
Joined
Jan 13, 2015
Messages
1,915
Reaction score
5,874
Vehicle(s)
Wrangler
Build Thread
Link
Occupation
Admin
Vehicle Showcase
1
TRANSMISSION (MANUAL)

Part |Nm |ft. lbs. | in. lbs. | Comments
Drain plug | 30 | 22 | - |
Fill plug | 30 | 22 | - |
Shifter base to floor assembly bolts | 8 | - | 70 |
Control shaft cover assembly bolts | 25 | 18 | - |
Shift lever bolt | 8 | - | 70 |
Output speed sensor bolt | 8 | - | 70 |
Transmission stroke sensor bolts | 25 | 18 | - |
Input shaft retainer bolts | 9 | - | 80 |
Clutch release bearing retainer bolts | 10 | - | 88 |
Output shaft lock nut | - | - | - |
Shift fork detent bolts | 25 | 18 | - |
Shift fork support bolts | 8 | - | 71 |
Reverse idler gear shaft bolts | 20 | 15 | - |
Countershaft bolt | 100 | 74 | - |
Transmission case bolts | 40 | 30 | - |
Transmission oil separator bolts | - | - | - |
Transmission shift guide plate bolts | - | - | - |
Transmission mount bolts | 47 | 35 | - |
Shift cable retaining bracket | 22 | 16 | - |
 
OP
OP
JAY

JAY

Administrator
Administrator
First Name
Jay
Joined
Jan 13, 2015
Messages
1,915
Reaction score
5,874
Vehicle(s)
Wrangler
Build Thread
Link
Occupation
Admin
Vehicle Showcase
1
WHEELS & TIRES

Part |Nm |ft. lbs. | in. lbs. | Comments
Spare tire carrier bolt | 17.5 | 13 | - |
Spare tire carrier lug nut | 80 | 59 | - |
Tire pressure sensor nut | 1.4 | - | 12 |
 
OP
OP
JAY

JAY

Administrator
Administrator
First Name
Jay
Joined
Jan 13, 2015
Messages
1,915
Reaction score
5,874
Vehicle(s)
Wrangler
Build Thread
Link
Occupation
Admin
Vehicle Showcase
1
WHEEL BOLTS

| Torque | Lug Bolt Size | Socket Size | Hub Size
Sport | 130 ft. lbs. [176 Nm] | M14 x 1.50 | 22 mm | 71.5 mm
Sahara | 130 ft. lbs. [176 Nm] | M14 x 1.50 | 22 mm | 71.5 mm
Rubicon | 130 ft. lbs. [176 Nm] | M14 x 1.50 | 22 mm | 71.5 mm
 
Advertisement

Dwayne Lane's Chrysler Jeep Dodge
 
Advertisement
Top