- Thread starter
- Banned
- #1
You DO want to kill 12v power before working on any electrical connections on your JL/JLU!
To kill 12v power coming from the JL/JLU's Main and ESS batteries you need to disconnect as per the picture below. One nut is a 10mm nut and the other two, are 13mm nuts.
To kill 12v power coming from the JL/JLU's Main and ESS batteries you need to disconnect as per the picture below. One nut is a 10mm nut and the other two, are 13mm nuts.
Sponsored
Last edited: