TJEli
Well-Known Member
- Thread starter
- #1
I am updating this thread with a first page build list of the Jeep in its current state and I will keep it updated:
2018 JLUR Auto/3.6 fully loaded except for proximity key and safety alert
Metal Cloak 3.5" Game Changer with Falcon 2.1 shocks
1/2" Teraflex rear coil spacer
3" Bumpstop extensions front, 2" rear
Falcon 2.2 steering stabilizer
Dana Advantec 44 diff covers
38x13.50 R17 Milestar Patagonia MT tires
Method MR301 trail series wheels. 17x8.5 0 offset
WARN Zeon 10S with Artec winch plate
Mopar front winch gaurd
Factor 55 fairlead, flatlink and receiver D ring mount
Rugged Ridge Spartacus tire carrier
Rugged Ridge XHD Rock Sliders
Uniden CB and 4' Wilson Superflex
ARB Dual on board air with tire inflation kit
Bestop Trektop NX
Bestop Soft Doors
Superchips Flashcal
That's it for now......
I have been asked by a few people to do this so here you go...…
Here is my new JLUR that I was going to "leave stock".
Picked up from Ashland Chrysler in August:
Warn Zeon 10-S, Artec Plate, Maximus hook tender and Mopar bull bar:
Daystar 2" Lift: https://www.jlwranglerforums.com/forum/threads/daystar-2-lift-intalled.15496/
37x12.50 KO2s: https://www.jlwranglerforums.com/forum/threads/photos-daystar-2-and-37-ko2s.16447/
Falcon 2.1 shocks and 2.2 steering stabilizer installed: https://www.jlwranglerforums.com/forum/threads/falcon-jl-shock-measurements-and-install.15925/
CB Install: https://www.jlwranglerforums.com/forum/threads/finished-my-cb-install-pics-inside.17267/
Metal Cloak 3.5 Game Changer Installed: https://www.jlwranglerforums.com/forum/threads/metalcloak-3-5-game-changer-install-with-pics.18153/
Spidertrax spacers and ROAM slider steps installed:
Method 701 Trail Series Wheels installed. 17x8.5, 0 Offset, 4.75BS
That is how she sits now. Future plans "may" include 39x13.50 KM3s, fenders and some upgraded shafts that let me remove the FAD and run lockouts. So far, I am really liking the JL. I do all my own work and I am happy to answer questions.
-Eli
2018 JLUR Auto/3.6 fully loaded except for proximity key and safety alert
Metal Cloak 3.5" Game Changer with Falcon 2.1 shocks
1/2" Teraflex rear coil spacer
3" Bumpstop extensions front, 2" rear
Falcon 2.2 steering stabilizer
Dana Advantec 44 diff covers
38x13.50 R17 Milestar Patagonia MT tires
Method MR301 trail series wheels. 17x8.5 0 offset
WARN Zeon 10S with Artec winch plate
Mopar front winch gaurd
Factor 55 fairlead, flatlink and receiver D ring mount
Rugged Ridge Spartacus tire carrier
Rugged Ridge XHD Rock Sliders
Uniden CB and 4' Wilson Superflex
ARB Dual on board air with tire inflation kit
Bestop Trektop NX
Bestop Soft Doors
Superchips Flashcal
That's it for now......
I have been asked by a few people to do this so here you go...…
Here is my new JLUR that I was going to "leave stock".
Picked up from Ashland Chrysler in August:
Warn Zeon 10-S, Artec Plate, Maximus hook tender and Mopar bull bar:
Daystar 2" Lift: https://www.jlwranglerforums.com/forum/threads/daystar-2-lift-intalled.15496/
37x12.50 KO2s: https://www.jlwranglerforums.com/forum/threads/photos-daystar-2-and-37-ko2s.16447/
Falcon 2.1 shocks and 2.2 steering stabilizer installed: https://www.jlwranglerforums.com/forum/threads/falcon-jl-shock-measurements-and-install.15925/
CB Install: https://www.jlwranglerforums.com/forum/threads/finished-my-cb-install-pics-inside.17267/
Metal Cloak 3.5 Game Changer Installed: https://www.jlwranglerforums.com/forum/threads/metalcloak-3-5-game-changer-install-with-pics.18153/
Spidertrax spacers and ROAM slider steps installed:
Method 701 Trail Series Wheels installed. 17x8.5, 0 Offset, 4.75BS
That is how she sits now. Future plans "may" include 39x13.50 KM3s, fenders and some upgraded shafts that let me remove the FAD and run lockouts. So far, I am really liking the JL. I do all my own work and I am happy to answer questions.
-Eli
Sponsored
Last edited: