The hole on roll bar - what is designed for?

[Midding]

the one touch removal thread and the the one putting it back on both show bolts going through those holes. youtube videos. there are folding brace arms that bolt to the downward arc of the rollbar, plain to see

Perhaps but no. I have two Rubicons, 2019 and 2021, with Sky One Touch they are not in use or used.

Sponsored

 

[Chile1]

For attaching the Cool Tech H3R Fire Extinguisher bracket

 

[mgarciaknight]

Thats where the Johnson Rod goes.

 

[Creeker]

Where to attach the Flux Capacitor

On a lifted JL with 37's, things can get interesting at 88 MPH or higher.

 

[kermitjewel]

Perhaps but no. I have two Rubicons, 2019 and 2021, with Sky One Touch they are not in use or used.

you are corrrect the one touch uses the two holes higher up

 

[calemasters]

It may be an assembly aid used during manufacturing and is not needed after the vehicle is built.

 

[JPAloha]

My understanding is that it’s used as a hook point during manufacturing.

I used them to mount this….

 

[CoolTech]

That's for creative aftermarket companies to use for Fire Extinguisher mounts. Just sayin'

 

[Heimkehr]

Tailgater lights? That's the first time I've seen cubes mounted (and aimed) in such a manner.

 

[JPAloha]

Tailgater lights? That's the first time I've seen cubes mounted (and aimed) in such a manner.

A happy coincidence that they also serve that purpose.

I set them up with the intention they were in case of nighttime recovery scenarios.

 

[CJ7 and 4 wheel drive]

Missile launcher attachment point

Nope that is in one of the accessory electrical sockets on the driver's side.

 

[KDoc]

Anyone know what those 2 holes on roll bar designed for originally?

For the soft top to be attached …

 

[Krowensby]

Anyone know what those 2 holes on roll bar designed for originally?

If it is on the top it's for the GPS/XM radio antennae mount.

 

[The Last Cowboy]

Rear turret reinforcement mounting point for the .50 cal.

 

[Wkaz]

It's the other end of the safety belt attachment point. It does tap out nicely for a 3/16' x 18.

Sponsored