TazerJL Feature Requests

[Conejoracer]

I’d like the sway bar disconnect to operate above 30mph. I’d prefer no limit, but at least make it more realistic like 60 mph.

Sponsored

 

[jawest12]

I’d like the sway bar disconnect to operate above 30mph. I’d prefer no limit, but at least make it more realistic like 60 mph.

You can do this with the Tazer already. Look up button remapping in the manual.

 

[AZ Hella]

I also would like manual control of the FAD.

 

[AZ Hella]

I drive a manual and it would be cool to control “rock crawl” with my left hand using the next/previous button along with the left arrow button so I could work the stick.

 

[fixbroke]

One more vote here for being able to disable FAD while in 4LO, preferably with a quick action that doesn't require going into the audio Tazer menu. We manual-transmission folks could use some 2LO action now and then, especially when towing a trailer.

Another request for the Gladiator drivers is to make the Selectable Tire Fill Alert enable option stick between key cycles. Right now you have to enable STFA in the settings menu every time you cycle the key. It's not like we use that feature every day, but it makes the STFA procedure unnecessarily cumbersome.

Thanks!

 

[word302]

One more vote here for being able to disable FAD while in 4LO, preferably with a quick action that doesn't require going into the audio Tazer menu. We manual-transmission folks could use some 2LO action now and then, especially when towing a trailer.

Another request for the Gladiator drivers is to make the Selectable Tire Fill Alert enable option stick between key cycles. Right now you have to enable STFA in the settings menu every time you cycle the key. It's not like we use that feature every day, but it makes the STFA procedure unnecessarily cumbersome.

Thanks!

Making the 2 low option isn't something that can be done with software, it would require a different transfer case.

 

[fixbroke]

Front axle off when in 4 low? When would you use that? I can do this but whyyy?

Making the 2 low option isn't something that can be done with software, it would require a different transfer case.

It can be done by temporarily disabling the FAD.

 

[word302]

It can be done by temporarily disabling the FAD.

Well sure but that's not exactly what I would call 2 low.

 

[fixbroke]

If you're in low range with only two wheels driven, it's good enough for me. Potato, puh-tah-toe.

 

[rcliff1]

Waiting on the Hi idle to work with the ecodiesel...

 

[breakerbaker]

Did Joe release any word on the light show to be enabled with a press of the hazard button? I feel it should be a quick double-tap as many states it is illegal to run "emergency" lights, since your break lights will be flashing. I also am inquiring if this feature is added and I make a custom light show if I double-tap the hazard button if I can select a certain show to default to.

 

[T-Rob]

This would be a GREAT feature!

 

[Rhinebeck01]

Did Joe release any word on the light show to be enabled with a press of the hazard button? I feel it should be a quick double-tap as many states it is illegal to run "emergency" lights, since your break lights will be flashing. I also am inquiring if this feature is added and I make a custom light show if I double-tap the hazard button if I can select a certain show to default to.

Don't hold your breath. Seriously doubt Joe would go for it.

To easy to accidentally toggle Light Show how in motion with this. Traffic Tickets and slight liability to Zautomotive.

 

[rcliff1]

I just want the winch mode fixed for the diesel......

 

[T-Rob]

Don't hold your breath. Seriously doubt Joe would go for it.

To easy to accidentally toggle Light Show how in motion with this. Traffic Tickets and slight liability to Zautomotive.

Actually, I spoke with Joe...he likes this idea and is going to look into it. More to follow.

Sponsored