Tazer versus JScan

[THAW]

So…. Can Jscan do the things I asked about or no ?

My question is, can you use lockers in 4H or rear lockers in 2WD, and disconnect the sway bar nanny free (have it not be speed limited) with the Jscan ?

Oops, I was incorrect. They can be done with JScan using the "Trail View" menu (mentioned by @Rhinebeck01).

Sponsored

 

[Terrymo]

Thanks @Rhinebeck01 today I learned some more.

 

[Roky]

Oops, I was incorrect. They can be done with JScan using the "Trail View" menu (mentioned by @Rhinebeck01).

Thanks @Rhinebeck01 today I learned some more.

Yeah I have @Rhinebeck01 on speed dial, he’s been a good friend and very helpful to me from the jump….I usually ask him about these kinds of things, but sometimes I like mingling with the masses..

 

[Terrymo]

Yeah I have @Rhinebeck01 on speed dial, he’s been a good friend and very helpful to me from the jump….I usually ask him about these kinds of things, but sometimes I like mingling with the masses..

And we give you bad info…how’s that working for you

 

[THAW]

For anyone curious about JScan functionality, the app can be downloaded for free and explored in demo mode.

 

[Roky]

And we give you bad info…how’s that working for you

It’s all good, I’ve been on here long enough to know who to trust and who I just smile and nod to…

 

[TopGunViper]

I’ve had tazer for about a year now and love it!
0 issues and have received answers to my questions from their support quickly.

 

[Sean L]

It’s all good, I’ve been on here long enough to know who to trust and who I just smile and nod to…

As I sit here watching with my Flashcal....

 

[CO2Wrangler]

Oops, I was incorrect. They can be done with JScan using the "Trail View" menu (mentioned by @Rhinebeck01).

Anyone have issues with JScan disconnecting midtrail? That TrailView is great when it works, but it's about a 50/50 shot in my experience.

 

[Ratbert]

only thing that JScan cant do is 3 beeps...but I cant forget that with JScan I was able to initialize remote START/STOP that my dealer was not able to.

There's a crapload of Tazer things that JScan can't do. One of my favorites is Turn Assist.

 

[C.Sco]

There's a crapload of Tazer things that JScan can't do. One of my favorites is Turn Assist.

*cries in 4xe*

 

[LSJKU]

Jscan is more in depth than Tazer if you use the OBDlink mx+. You pretty much have the same access as a dealer would with OEM diag tools. This is the setup I use and works flawlessly with Jscan.

https://www.obdlink.com/products/obdlink-mxp/

I just picked up an OBDLink MX+ to use for data logging on my 3.6L 6spd in an effort to look deeper into the hesitation problem. Saw on the OBD website where the dongle supports Jscan as well. I'll certainly be looking into Jscan to replace my Tazer. Not that I dislike the Tazer, but I don't like permanently bypassing the SGW protection.

Bonus: the OBDLink MX+ also works with FORScan on my Raptor w/o needing a windows based computer. That is an awesome for the OBDLink.

 

[Terrymo]

*cries in 4xe*

I’m watched a zautomotive YouTube video where they listed all the tazer functions that don‘t work on 4xe, with no indication that would change.

 

[sixspeed]

I do this plus Tazer.

Tazer for stop/start, winch mode, cool down mode, etc.

I have the extension cable and can very quickly disconnect the Tazer as needed.

It's not that quick. You have to unmarry and reboot.

 

[LSJKU]

It's not that quick. You have to unmarry and reboot.

I do not believe this to be the case. Merely remove the Tazer from the SGW and reconnect the SGW cables as Aonarch says. Done deal.

Sponsored