Tazer mini (used?)

[JHJeepJL2018]

I bought a second hand tazer mini (seller stated never used) but it didnt prompt me to marry device. The jeep reads to unmarry and prompting me with a key. Do I need to purchase the 50.00 code or am I missing something? The device also read doesn't recognize VIN

Sponsored

 

[Rhinebeck01]

I bought a second hand tazer mini (seller stated never used) but it didnt prompt me to marry device. The jeep reads to unmarry and prompting me with a key. Do I need to purchase the 50.00 code or am I missing something? The device also read doesn't recognize VIN

@JHJeepJL2018

You will need to pay ZAutomotive, $50 for the unmarry key...

When at the ZAutomotive website ordering page for the Unmarry key ....Do read there carefully... Again read there --- in particular about the Unmarry #. You will need to use the ZAutomotive, ZPU Utility to get that "Unmarry#".

Here is the link for the ZPU Utility:
https://www.zautomotive.com/z-automotive-programming-uti/

Link for the $50 Unmarry Key
https://www.zautomotive.com/product/unmarry-key/

DO update the firmware on your Tazer JL with the ZPU Utility.

DO download the Tazer JL Instructions and read them over carefully BEFORE you install the Tazer JL.
https://www.zautomotive.com/zpu/instructions/TazerJLMiniUserGuide1128.pdf

.

 

[Rhinebeck01]

IF, you want to contact ZAutomotive in regard to this issue.

You can text Joe @ ZAutomotive and ask him for assistance.... TEXT, Joe at 631-533-3363
He'll get back at you...... usually takes a few hrs. for his reply. Do NOT call this number.

Joe and his worker Ian are both terrific to deal with.. top notch support to say the least.

Sponsored