Synergy wheel spacers - stock wheels

[Rodeoflyer]

I like the stock wheels and am running 35'' Toyo MT's. What are thoughts/opinions on the Synergy wheel spacers over another wheel choice?

8810-02 1-3/4" M14 X 1.50

I'd typically never use spacers but I like the stock wheels a lot.

Sponsored

 

[Rubicon_LA]

That's what I have - Synergy spacers with 35" on stock wheels. Love the look

 

[Rodeoflyer]

That's what I have - Synergy spacers with 35" on stock wheels. Love the look

I'm really leaning that way unless someone can give me a solid reason not to.

 

[Rubicon_LA]

Do it. No regrets whatsoever

 

[ODDs]

Do auto service shops give you a hassle about using spacers? I used thinner spacers before that required me to replaced the studs, which was fine, but then the shops won't work on it because of the spacers. Do you get less hassle when these thicker adapters with offset studs?

 

[Rubicon_LA]

Never had any issues even serviced at dealerships

 

[4xFUN]

Like you, I love the look of the stock wheels! I went with Bora 1 1/4" spacers, wheel and hub centric, black anodized and American made. They fit fine with stock Rubi wheels as they have recessed pockets that clear the small amount of stud that extends from the 1 1/4" spacer.

 

[Rodeoflyer]

Like you, I love the look of the stock wheels! I went with Bora 1 1/4" spacers, wheel and hub centric, black anodized and American made. They fit fine with stock Rubi wheels as they have recessed pockets that clear the small amount of stud that extends from the 1 1/4" spacer.

They didn't require shorter studs? Do you have a part # for the Bora's you used? Thanks!

 

[Ctaylor1432]

I’m using synergy with stock wheels and 35” Toyo R/T,s. No complaints!

 

[Rodeoflyer]

I’m using synergy with stock wheels and 35” Toyo R/T,s. No complaints!

Yeah... I'll probably just go with the Synergy 1.75's. I see they work with factory stud length/s.

I have a lot of trust in their products.

 

[4xFUN]

They didn't require shorter studs? Do you have a part # for the Bora's you used? Thanks!

They are custom built per order so no official part number, however they fit just fine with no trimming of stud length-there is plenty of space in the stock Rubi wheel 'pockets' for the small amount of stud that extendes from the spacer. Mine are 1 1/4" and as the picture I have included shows, the studs will clear easily-it looks like 1 1/8" would have also fit. The image shows the depth of the Rubi wheel pockets and amount of clearance between the studs and the base of the pockets. Hope this helps!

 

[quietpeen]

I had bora 2” spacers with my stock wheels and 35’s for a short time and it worked great.

 

[Halstem1]

I’ve been running the synergy spacers for 6 months or so. Love them with the stock wheels.

 

[Rodeoflyer]

I think I'm set guys.. this thread answered all of my questions. Also, thank you for the hub depth pic. That does help.

 

[OnlyOne]

I like the stock wheels and am running 35'' Toyo MT's. What are thoughts/opinions on the Synergy wheel spacers over another wheel choice?

8810-02 1-3/4" M14 X 1.50

I'd typically never use spacers but I like the stock wheels a lot.

Why run spacers at all? Like the look?

Sponsored