Redbaron73
Well-Known Member
- Thread starter
- #1
I just replaced my RK 3.5 springs with Synergy 3in.
The synergy is side specific. My front driver side is much closer to the frame than the passenger side is. It doesn't touch, but is very very close.
Here are 3 pictures of the driver side, followed by one of the passenger.
When replacing the springs, I made sure the top isolator was in place and both nibs are sticking thru the top. The bottom isolator was replaced with one provided by synergy. There is no indexing of the front springs that I could tell. I am thinking that has something to do with the issue.
Any have suggestions?
The synergy is side specific. My front driver side is much closer to the frame than the passenger side is. It doesn't touch, but is very very close.
Here are 3 pictures of the driver side, followed by one of the passenger.
When replacing the springs, I made sure the top isolator was in place and both nibs are sticking thru the top. The bottom isolator was replaced with one provided by synergy. There is no indexing of the front springs that I could tell. I am thinking that has something to do with the issue.
Any have suggestions?
Sponsored