Brian0128
Well-Known Member
- First Name
- Brian
- Joined
- Feb 25, 2019
- Threads
- 15
- Messages
- 309
- Reaction score
- 386
- Location
- Annapolis, MD
- Vehicle(s)
- 2019 JLUR, 2018 Toyota TRD PRO
- Build Thread
- Link
- Occupation
- Engineer
- Vehicle Showcase
- 1
- Thread starter
- #1
We are currently using the AEV Procal Snap but we were given a NIB Tazer Lite and want to try it out for the TPMS feature. Can I just leave the Procal Harness PN 30301046 installed in case I decide to go back to the AEV if I don't like the Tazer Lite? Do you see anything wrong with this plan?
1. Plug in Procal Snap, Restore Factory Settings
2. Unplug Procal Snap from OBDII connector leaving harness connected between OBDII and Green Star Connector.
3. Update firmware on Tazer JL Lite.
4. Unplug SGW module above the OBDII connecor and plug the Tazer JL Lite in it's place.
4. If there are any issues, I unmarry the SGW and reinstall the AEV Procal Snap.
1. Plug in Procal Snap, Restore Factory Settings
2. Unplug Procal Snap from OBDII connector leaving harness connected between OBDII and Green Star Connector.
3. Update firmware on Tazer JL Lite.
4. Unplug SGW module above the OBDII connecor and plug the Tazer JL Lite in it's place.
4. If there are any issues, I unmarry the SGW and reinstall the AEV Procal Snap.
Sponsored