Sponsored

Storage shelf attached to roll bar

Dubeau9005

Well-Known Member
First Name
Keith
Joined
Feb 26, 2018
Threads
21
Messages
203
Reaction score
108
Location
Ottawa
Vehicle(s)
2018 Jeep Wrangler JLU Sport S, 2010 GMC Sierra 1500
Does anyone know if a company make a storage shelf that attaches to the soft top bracket location for the 4 door? We have a 100 lb dog that goes in the back so most racks are too low to be able to fit him back there. Looking for a shelf that isn’t too big just so we can put our bags of clothes and diaper bags, etc. Thinking of building something if not but hoping that someone already offers a solution or someone on here has tackled this already.
Sponsored

 

Pic18

Well-Known Member
Joined
Jan 19, 2018
Threads
21
Messages
838
Reaction score
1,428
Location
RI
Vehicle(s)
2018 Mojito JLUR, 2017 Grand Cherokee Trailhawk (my wife’s)
Vector off road and Teraflex both have them.

Edit: TeraFlex May be JK only.
 
Last edited:

rustyshakelford

Banned
Banned
Banned
First Name
Brett
Joined
Sep 14, 2018
Threads
41
Messages
2,430
Reaction score
3,017
Location
Navasota, TX
Vehicle(s)
2019 JLUR-8 speed 2020 F-350
We have designed one. Currently we’re less than 60 days with having the next batch ready. These are made in Magnolia, Texas and are great. We carry our two pits in the rear of my wife’s JL all the time without issue. Ours is also set to nearly the lowest position.

We’re waiting for the metal order from laser, then it’ll be welded up and sent to powder.

Brett

2B3184C6-47B6-4494-8DDB-8B768BF6E74E.jpeg


148B948E-BCA5-4456-A465-1DFF4140F174.jpeg


7E73C525-4B2B-450F-8F2D-D5966A09E8C0.jpeg


8D67397E-CF6F-4853-A462-7CB9BD4BB830.jpeg
 

IronScott

Well-Known Member
First Name
Scott
Joined
Sep 21, 2018
Threads
32
Messages
1,007
Reaction score
1,204
Location
NW Arkansas
Vehicle(s)
2019 JLU Sahara, 1992 Jeep YJ, 2002 Chevy Silverado
We have designed one. Currently we’re less than 60 days with having the next batch ready. These are made in Magnolia, Texas and are great. We carry our two pits in the rear of my wife’s JL all the time without issue. Ours is also set to nearly the lowest position.

We’re waiting for the metal order from laser, then it’ll be welded up and sent to powder.

Brett
I’ve seen you post about these before. Sounds like they are getting close. Do you have a thread for them? I’d like to subscribe so I don’t miss when they are available.
 

rustyshakelford

Banned
Banned
Banned
First Name
Brett
Joined
Sep 14, 2018
Threads
41
Messages
2,430
Reaction score
3,017
Location
Navasota, TX
Vehicle(s)
2019 JLUR-8 speed 2020 F-350
I’ve seen you post about these before. Sounds like they are getting close. Do you have a thread for them? I’d like to subscribe so I don’t miss when they are available.
Not yet but I will try to get one today. Literally every customer that has seen them has ordered one. Add a ton of useful storage room in the back

Brett
 

Sponsored

rustyshakelford

Banned
Banned
Banned
First Name
Brett
Joined
Sep 14, 2018
Threads
41
Messages
2,430
Reaction score
3,017
Location
Navasota, TX
Vehicle(s)
2019 JLUR-8 speed 2020 F-350
I’ve seen you post about these before. Sounds like they are getting close. Do you have a thread for them? I’d like to subscribe so I don’t miss when they are available.
Not yet but I will try to get one today. Literally every customer that has seen them has ordered one. Add a ton of useful storage room in the back

Brett
 
OP
OP
Dubeau9005

Dubeau9005

Well-Known Member
First Name
Keith
Joined
Feb 26, 2018
Threads
21
Messages
203
Reaction score
108
Location
Ottawa
Vehicle(s)
2018 Jeep Wrangler JLU Sport S, 2010 GMC Sierra 1500
We have designed one. Currently we’re less than 60 days with having the next batch ready. These are made in Magnolia, Texas and are great. We carry our two pits in the rear of my wife’s JL all the time without issue. Ours is also set to nearly the lowest position.

We’re waiting for the metal order from laser, then it’ll be welded up and sent to powder.

Brett

2B3184C6-47B6-4494-8DDB-8B768BF6E74E.jpeg


148B948E-BCA5-4456-A465-1DFF4140F174.jpeg


7E73C525-4B2B-450F-8F2D-D5966A09E8C0.jpeg


8D67397E-CF6F-4853-A462-7CB9BD4BB830.jpeg
Can the brackets be reversed to have it higher than the mounting point at the roll bar? I would need this type of setup but quite a bit higher. Do you have a picture of it mounted in the upper most position or is this something you can do once you get it all finalized and powder coated? This may be almost exactly what I am looking for.
 

rustyshakelford

Banned
Banned
Banned
First Name
Brett
Joined
Sep 14, 2018
Threads
41
Messages
2,430
Reaction score
3,017
Location
Navasota, TX
Vehicle(s)
2019 JLUR-8 speed 2020 F-350
Can the brackets be reversed to have it higher than the mounting point at the roll bar? I would need this type of setup but quite a bit higher. Do you have a picture of it mounted in the upper most position or is this something you can do once you get it all finalized and powder coated? This may be almost exactly what I am looking for.
Depending how high you could not use the drop brackets in theory. I don’t have any pics of it in the higher position unfortunately but might be something we can work on!

Brett
 

rustyshakelford

Banned
Banned
Banned
First Name
Brett
Joined
Sep 14, 2018
Threads
41
Messages
2,430
Reaction score
3,017
Location
Navasota, TX
Vehicle(s)
2019 JLUR-8 speed 2020 F-350

Sponsored

rustyshakelford

Banned
Banned
Banned
First Name
Brett
Joined
Sep 14, 2018
Threads
41
Messages
2,430
Reaction score
3,017
Location
Navasota, TX
Vehicle(s)
2019 JLUR-8 speed 2020 F-350

jhackathorne

Well-Known Member
First Name
Joe
Joined
Dec 7, 2020
Threads
9
Messages
1,398
Reaction score
2,398
Location
Denver
Vehicle(s)
'21 JLUR
the link was working.

check out

www.texasmetalworks.com

go to the Jeep accessories! There have been a ton of improvements made and we absolutely love ours. One of those accessories we don’t want to be without at this point!

brett
Thanks for responding. I went with Vector model. I really liked the TMW one, but it was over double the cost since you have to buy the mounting brackets too. I appreciate the response however!
Sponsored

 
 



Top