Sponsored

Stock halogen REVERSE lights UPGRADE!!

Cracker_Box

Well-Known Member
First Name
Blake
Joined
Jun 1, 2019
Threads
1
Messages
65
Reaction score
124
Location
Lafayette, LA
Vehicle(s)
2019 Wrangler Sport S
So as most of you know the entire lighting package for Wranglers that do not have factory LED group, well they wack.

Currently I have upgraded all the front end lights, and have been searching for LED reverse light bulb replacement options.

Well, I found them.

https://dieselleds.com/collections/...40-super-b-led-revere-light-kit-2100-lumens-1
20190822_201111.jpg


One installed vs stock bulb
20190822_202424.jpg


Then I was like let me turn off the flood light
20190822_203735.jpg


Then I said... Let's back down the driveway
20190822_204227.jpg


And yes... The reverse camera is actually useable at night now.
20190822_203755.jpg
Sponsored

 

Gregj

Well-Known Member
First Name
Greg
Joined
Dec 15, 2018
Threads
19
Messages
2,280
Reaction score
5,093
Location
West Texas
Vehicle(s)
JLU Rubicon, JLU Sport, JTuRD
@jason0341 it's pretty easy to remove the tail lights, on the horizontal surface behind the sportbar there is a cover about 2x2, under the cover is a plastic torx screw, remove that and then the tail light may need a little tug to get it to pop out. Unplug the connector by releasing the lock and pressing the tab. There are a few phillips screws holding the mounting bracket on, remove those then the light just twists out. replace it with the new bulb plug it in and reverse the process to reinstall.

Gregj
 

jason0341

Well-Known Member
First Name
Jason
Joined
Aug 21, 2019
Threads
32
Messages
444
Reaction score
1,137
Location
Colorado
Vehicle(s)
2020 2.0L Rubicon
@jason0341 it's pretty easy to remove the tail lights, on the horizontal surface behind the sportbar there is a cover about 2x2, under the cover is a plastic torx screw, remove that and then the tail light may need a little tug to get it to pop out. Unplug the connector by releasing the lock and pressing the tab. There are a few phillips screws holding the mounting bracket on, remove those then the light just twists out. replace it with the new bulb plug it in and reverse the process to reinstall.

Gregj
Thanks for the info!
Sponsored

 
 



Top