EugeneTheJeep
Well-Known Member
Think of it like an extra quart, just in case.So the Jeep tech increased the PSI higher than the recommended PSI that is written on the door jam?
Sponsored
Think of it like an extra quart, just in case.So the Jeep tech increased the PSI higher than the recommended PSI that is written on the door jam?
All new kitSame one that was installed incorrectly, not a new one, right?
Great is that’s true. It probably doesn’t move the fluid well if it’s upside down but didn’t get damaged.
Yep checked when I got home and tire psi at all 4 corners was 47psi according to my arb acu guage. Was a very bouncy wandering ride home. Set all at 35psi drove around and all seems well...For now lolSo the Jeep tech increased the PSI higher than the recommended PSI that is written on the door jam?
Luckily they did mine correctly. I would be pissedTook my JL in today for the V-41 recall, had a 9:00 am appointment (I was early), 1.5 hours later it was done. Drove home to see this.
I initially asked them if they could give me the part and using my tools to let me put it on in the parking lot to save me time, they thought I was kidding, I was serious. I would have singed off on the paperwork just like like they would have preformed the warranty work. I Could have been in and out in 15 minutes.
Can anybody guess guess what I getting ready to do at home and torque to 59 lb-ft .
EDIT: Appears if I need anymore service work done on my JL it is going to be at least a 1 hour drive, sure would have been nice to to keep it local. The front of my Jeep is the bottom of the photo.
Can you send me direct link to this . I tried sumbiting mine but it doesn't work.I submitted for reimbursement and provided pics of the receipt and payment. Received this email today! Paid for my self-install of the Falcon 2.2
***
Dear Mr. Chubrocker,
Thank you for contacting Jeep Customer Care. We are happy to assist you with regards to your concern. Your satisfaction is important to us!
We are pleased to inform you that we have approved a total of $282.62 for the Reimbursement. We will be sending the check to the mailing address on file for you. Please allow 30 calendar days for the check to arrive.
Please don't hesitate to contact us for any other concerns. Thank you for your continued business with Jeep Automobiles.
Sincerely,
Moi
Reimbursement Specialist
****
Now awaiting recalls for trackbar, drag link, and tie rod. Have the receipts ready.
Nevermind it worked today.Can you send me direct link to this . I tried sumbiting mine but it doesn't work.
1. Check to make sure they installed it in the correct direction. There is a label with an arrow indicating which direction.I had the recall work done and now I notice my steering wants to veer slightly to the right while driving. I'm not sure if what they did had any impact on alignment or why I now notice this change.
I just had the recall done yesterday. It definitely feels better. Mine also pulls slightly to the right. I checked and it is installed correctly. I will give it a couple more days and have them check the alignement.I had the recall work done and now I notice my steering wants to veer slightly to the right while driving. I'm not sure if what they did had any impact on alignment or why I now notice this change.
FYI - There are only two alignment adjustments without parts on a JL Wrangler - toe and steering wheel center, neither affect pulling. When my first V1 steering stabilizer was pulling, I gave it some time in case it was still new and needed to break-in. But it kept pulling to the right, a new V1 steering stabilizer fixed the problem. There could be a situation where the pulling goes away after it breaks-in though.I just had the recall done yesterday. It definitely feels better. Mine also pulls slightly to the right. I checked and it is installed correctly. I will give it a couple more days and have them check the alignement.