Sky one touch swap

[Scratch]

I purchased a 21 or 22 SOT. I'd like to put this on my 24 392. I have most parts but will need pieces that changed for 24/25. I know the header trim is different and possibly the wire harness in it. Will I need to purchase the microphones separate or are they built into the harness or header?
Looks like there are several header part numbers. How do I know what one I need for my 392?

I'm also struggling with the bolt locations. They are different lengths. Do You have a drawing of the bolts?
It just arrived, I'm Trying to figure out all my thoughts for this.
Thanks for your help.
Bob

Sponsored

 

[Balibe]

I know this does not help with parts, but have you looked at these video's? One is a swap and the other is a removal. Benny @AllMoparParts.com may be able to help with the hardware you need.

SOT Swap​

​

SOT Removal​

 

[Scratch]

Yes of course, those both seem to be the best sources and they compliment each other. I've have done screen shots of Brandon's cardboard bolt holder. I might be close to figuring out my bolt mess.
This was an ebay purchase. The seller did a great job packaging and sending me everything. HOWEVER, because it was shipped it was taken apart a little further so it looks a little different and has more bolts than either of these videos. The videos simply take the top off put it back on.. The second one swaps the trim.
There is definitely a difference on the new trim. The microphones face the passenger compartment where as the older trim the microphones face the straight down.
If I was I putting it on my 21 JLUR., I think I'd be close to making it happen.
BTW the mopar diagrams on their parts pages are terrible.
I'll try and post some photos later today.
Thanks for the suggestions.
Bob

 

[AllMoparParts.com]

I purchased a 21 or 22 SOT. I'd like to put this on my 24 392. I have most parts but will need pieces that changed for 24/25. I know the header trim is different and possibly the wire harness in it. Will I need to purchase the microphones separate or are they built into the harness or header?
Looks like there are several header part numbers. How do I know what one I need for my 392?

I'm also struggling with the bolt locations. They are different lengths. Do You have a drawing of the bolts?
It just arrived, I'm Trying to figure out all my thoughts for this.
Thanks for your help.
Bob

Hi Bob,
I would need your VIN to find a compatible header panel/wiring that includes your current options

Much of the hardware is not listed or listed well, I have attached all of the parts diagrams

I have also attached install/removal procedures

Please let me know if you have any other questions,
- Benny

 

[Scratch]

Is it possible to get the complete header or will I need to get all the pieces separately and put it together?
I appreciate the help.
Bob

 

[AllMoparParts.com]

1c4rjxsj4rw297559
Is it possible to get the complete header or will I need to get all the pieces separately and put it together?
I appreciate the help.
Bob

Hi Bob,
Most of the time the panel and wiring is one assembly, But not in this case. here is what you would need

https://parts.allmoparparts.com/oem...ing-7eb83tx7af?c=bD0xJm49U2VhcmNoIFJlc3VsdHM=
https://parts.allmoparparts.com/oem...tch-7kb75tx7aa?c=bD0xJm49U2VhcmNoIFJlc3VsdHM=
https://parts.allmoparparts.com/oem...ing-68599707ac?c=bD0xJm49U2VhcmNoIFJlc3VsdHM=

Please let me know if you have any other questions.

Thank you,
- Benny

 

[Scratch]

thanks and they are in my cart...
Do I need to order the microphones, SOS switch etc?

 

[AllMoparParts.com]

I do not see these parts being unique to SOT so you can swap them into the new trim piece.

- Benny

 

[Scratch]

I went purchase these from your website. IT says one or more items is on back order. Do you have any information on this?
Thank you.

 

[AllMoparParts.com]

Hi Robert,
Please send me the order # and I will review all parts

- Benny

 

[Scratch]

Your order number is 721611

 

[Scratch]

I got a message from Mike.
My order is on hold. The switch is on national back order.

It is possible to use the harness and switch from the 21-23 header that I already have and put it in the new style plastic header trim for the 24 392? Or perhaps just use the switch that I currently have?
Parts in my possession.
SOT switch 6AC65TX7AA
SOT Harness 68470581AA


I really appreciate the help.
Bob

 

[AllMoparParts.com]

Mike is correct, I would estimate about 30 days to get this in.

Those part numbers you have are applicable only up until 2023, There were a number of changes made to the JL/JT platform for 2024+ so I cannot confirm if they will work.

- Benny

 

[Scratch]

Benny,
Can you please check on this order? 721611
I was told it would ship on Monday. No one has responded to my inquiries
Thanks
Bob

 

[AllMoparParts.com]

Hi Bob,
The switch is on backorder and the supplier has not provided any ETA, I am sorry it does look like the customer service team is a bit behind on emails.

Please let me know if you have any questions or requests here

Thank you,
- Benny

Sponsored