Show your JLUR with 35s

[kah.mun.rah]

Lift details? Looks beefy

Mopar 2" lift, old 16" ProComp wheels from my JK days, 35" Falken Wildpeak tires. Everything else when that pictures was taken is pretty much stock.

Sponsored

 

[vegasblue]

Clayton Overland 2.5" Lift, Metalcloak Fenders and Sliders. Mickey Thompson M/T 35" tires. Some cheap Procomp wheels because I beat on them. As a side, these tires are pretty amazing. Currently have about 20K on them with little wear showing. They do sing some. I five tire rotate them every oil change.

 

[white.jl.rubicon]

KO2 315’s on Mopar Slotted rims with Teraflex levelling kit

Did you just do the leveling kit or add control arms or shocks as well?

 

[Vinman]

Did you just do the leveling kit or add control arms or shocks as well?

Initially I did just the levelling kit but added the front lower Mopar longer control arms about 6 months later. Shocks and bumpstops are stock.

 

[LCW]

Roughly 2” lift

 

[NewJLU2019]

Mopar 2.0 Netted total 3.25 to 3.50 lift. 35's Toyo Open Country MT

 

[CWRUYOTE]

AEV 2.5" DualSport RT
BFG KOs

 

[AZ Hella]

Dynatrac 2” / 315 70 17 Cooper’s.

 

[cpawlFL]

315/70/17 Toyo AT3s. Teraflex 1”F/.5R spacers

 

[white.jl.rubicon]

315/70/17 Toyo AT3s. Teraflex 1”F/.5R spacers

Stock ride height ?

 

[cpawlFL]

Stock ride height ?

No. I installed Teraflex spacers to lift it slightly. 1” spacer in the front and a .5” spacer in the rear. Wasn’t necessary, but leveled it some and added some clearance. I like the ride and the way it drives from the factory, so I didn’t want to change too much for now.

Sponsored