Sahara/Rubicon LED DRL Harness Help

[Mickgolf00]

I’m starting this thread asking for assistance from Rubicon/Sahara owners with the LED DRL/Turns. Been following the thread below and hit a wall. Was hoping someone could pull a number or a parts guy could confirm the harness PN#.
A couple of us are upgrading from halogen to LED. I’ve got the assemblies from takeoffs but the guy I purchased from cut the harness. Attempting to avoid splicing. Part numbers we were given match to a halogen harness. Learned the hard way. Any help would be great.

https://www.jlwranglerforums.com/fo...numbers-fighting-with-dealership.10616/page-5

Sponsored

 

[atba]

Im am trying to find this PN still as i have Rubicon take offs i wanna put on my sport. I know someone got pictures of the harness i need but only a "partial" PN but not a full picture of the tag fully.

Im am trying to contact the dealer and i get no help from them apart for them asking for my VIN and giving me the wrong part. The parts people there arnt the sharpest.

 

[Deke]

I purchased some painted fenders with LEDs from someone who cut the harness about 6" from the plug that connects into body. I don't think there is a Mopar part number for the harness for LEDs but I was able to source the missing connector and repair what had been cut.
You can find the plug here: https://www.mouser.com/ProductDetai...96chTOer00CWg2sjZY4sWGHOj8fgQzNQUZExx253OiA==
and the pins for the harness here: https://www.mouser.com/ProductDetai...bNGbqwai4%2BBNglbThWYzHkbnd0Yj32/%2BFl5LFtA==
and the waterproof seals for the pins here: https://www.mouser.com/ProductDetai...KZ0CMoP%2BU/higpMJE264eJq2wXJph0OXPj5Mk4uFw==

I suggest buying extra pins and seals to practice with unless you have the right crimp tool. It took me a few tries to get it right.

 

[hoag4147]

I purchased some painted fenders with LEDs from someone who cut the harness about 6" from the plug that connects into body. I don't think there is a Mopar part number for the harness for LEDs but I was able to source the missing connector and repair what had been cut.
You can find the plug here: https://www.mouser.com/ProductDetail/Molex/34900-6140?qs=/ha2pyFadui96chTOer00CWg2sjZY4sWGHOj8fgQzNQUZExx253OiA==
and the pins for the harness here: https://www.mouser.com/ProductDetail/TE-Connectivity-AMP/7-1452665-1?qs=/ha2pyFadujIdv7bNGbqwai4%2BBNglbThWYzHkbnd0Yj32/%2BFl5LFtA==
and the waterproof seals for the pins here: https://www.mouser.com/ProductDetail/TE-Connectivity/967067-1?qs=/ha2pyFadujEXKZ0CMoP%2BU/higpMJE264eJq2wXJph0OXPj5Mk4uFw==

I suggest buying extra pins and seals to practice with unless you have the right crimp tool. It took me a few tries to get it right.

Hey Deke. Trying to help a friend out who bought LED DRLs that’s been cut. Do you know which wire color goes where in the plug? He is most likely just going to tap into existing Sport harness but colors are different. Thanks

 

[Deke]

Hey Deke. Trying to help a friend out who bought LED DRLs that’s been cut. Do you know which wire color goes where in the plug? He is most likely just going to tap into existing Sport harness but colors are different. Thanks

I used the wiring diagrams posted here on the forum and just matched the colors of my cut wires to the pins of the connector I added:
https://www.jlwranglerforums.com/JL-Wiring-Diagrams/LAMP-DRL-LEFT-PREMIUM-connector-details.pdf
https://www.jlwranglerforums.com/JL-Wiring-Diagrams/LAMP-DRL-RIGHT-PREMIUM-connector-details.pdf

 

[hoag4147]

I used the wiring diagrams posted here on the forum and just matched the colors of my cut wires to the pins of the connector I added:
https://www.jlwranglerforums.com/JL-Wiring-Diagrams/LAMP-DRL-LEFT-PREMIUM-connector-details.pdf
https://www.jlwranglerforums.com/JL-Wiring-Diagrams/LAMP-DRL-RIGHT-PREMIUM-connector-details.pdf

Thanks

 

[Gregj]

Post 21 in this thread should have the info you need.
https://www.jlwranglerforums.com/forum/threads/non-led-to-led-fender-light-question.19173/page-2
Gregj

 

[hoag4147]

Post 21 in this thread should have the info you need.
https://www.jlwranglerforums.com/forum/threads/non-led-to-led-fender-light-question.19173/page-2
Gregj

Appreciate it Greg

Sponsored