elispaulding
Active Member
- First Name
- Eli
- Joined
- May 27, 2020
- Threads
- 10
- Messages
- 28
- Reaction score
- 19
- Location
- Salt Lake City, UT
- Vehicle(s)
- 2020 Wrangler Unlimited Freedom
- Occupation
- Student at University of Utah
- Thread starter
- #1
Hi everyone,
I have a 2020 Wrangler Unlimited with the 2.0L. My friend and I installed a S&B Intake into it about 3 weeks ago. A couple days ago the check engine light came on. I brought the car into Jeep and they said it was because Purge Line and the other line next to it were not connected. These lines will not reach the filter and there is only a place for one line, not two. The guy at Jeep said this is what is causing the light to come on because these lines provide boost and prevent turbo delay. I have attached a couple pictures so you can see what I am talking about. Has anyone else experienced this or have any advice that could help me out?
Thanks!
I have a 2020 Wrangler Unlimited with the 2.0L. My friend and I installed a S&B Intake into it about 3 weeks ago. A couple days ago the check engine light came on. I brought the car into Jeep and they said it was because Purge Line and the other line next to it were not connected. These lines will not reach the filter and there is only a place for one line, not two. The guy at Jeep said this is what is causing the light to come on because these lines provide boost and prevent turbo delay. I have attached a couple pictures so you can see what I am talking about. Has anyone else experienced this or have any advice that could help me out?
Thanks!
Sponsored