BigGreen
Well-Known Member
- Joined
- Jul 11, 2019
- Threads
- 14
- Messages
- 87
- Reaction score
- 193
- Location
- United States
- Vehicle(s)
- JL Sport
- Thread starter
- #1
1
Sponsored
Last edited:
Can you please take a picture of where it is making contact. I’m confident we can get this resolved.The lift part is important. My driveshaft is coming in contact with the driver side mount under compression and I wanted to know if anyone else installed this one yet.
I removed the front skid, but it was this mount
And this is where it made contact
This may be a waste of time but is your front axle centered? If it was even a sliver off I could see how this might happen. The other thing you could do is bend the bracket just a smidge in a vice and just mount it slightly off centered to correct this. The critical components would be protected. The other option would be to obtain an aftermarket drive shaft from a company like Adams. This will for sure 100% correct your issue.No modifications, just slightly heavier AT tires in 265/70/17 on the factory steel Sport wheels