blnewt
Well-Known Member
- First Name
- Brad
- Joined
- Oct 8, 2018
- Threads
- 97
- Messages
- 9,883
- Reaction score
- 23,819
- Location
- New Mexico
- Vehicle(s)
- 2019 Jeep JL V6 SportS, (Retired 74 CJ-5, 80 CJ-7)
- Occupation
- Just ask @cosine he knows!
- Thread starter
- #61
Installed Rugged Ridge 3/4" spring spacer in front to bring the front back to level after adding the bumper and winch. Took about 2 hrs since I also rotated my tires while I was down there
The Rugged Ridge part # 18360.04 is for the JK but works fine for the JL too.
https://www.amazon.com/gp/product/B01GT8AJPW
You must cut off the two rubber orientation prongs on the OEM spring isolators. You need to mark on your bump stop & the spring isolator so you keep it in the same spot when you add the spacers since the isolator is a bit thicker on one end.
Here's a pick of before & after~
The Rugged Ridge part # 18360.04 is for the JK but works fine for the JL too.
https://www.amazon.com/gp/product/B01GT8AJPW
You must cut off the two rubber orientation prongs on the OEM spring isolators. You need to mark on your bump stop & the spring isolator so you keep it in the same spot when you add the spacers since the isolator is a bit thicker on one end.
Here's a pick of before & after~
Sponsored