Replacement Hardware, Clips Etc... Reference Guide

[AllMoparParts.com]

Creating this thread for commonly used and replaced hardware , fasteners and clips. Note all Hardware is sold individually.

Door Trim Panel clips
https://parts.allmoparparts.com/oem-parts/mopar-push-pin-6510359aa

Tailgate Trim Panel clips
https://parts.allmoparparts.com/oem-parts/mopar-clip-6511829aa

Front & Rear Flare attaching "W" style clips
https://parts.allmoparparts.com/oem-parts/mopar-w-type-clip-68526185aa

Fog Lamp Pigtail (connector replacement)
https://parts.allmoparparts.com/oem-parts/mopar-wiring-68087933aa





Feel free to post requests below


Thanks,
- Benny

Sponsored

 

[MyDaughters20JL]

what I'd like to see is a plug that would plug into the factory fog light harness, allowing me to add aftermarket lights without having to chop up the factory harness

 

[AllMoparParts.com]

what I'd like to see is a plug that would plug into the factory fog light harness, allowing me to add aftermarket lights without having to chop up the factory harness

I added a replacement connector for the fog lamp side above but what you would need is a new fog lamp harness as the chassis side pigtail is not available. If you would like a price on the harness I would need to know what style bumper you have. Sport, Sahara style with accents or Metal Rubicon style.

Thanks,
- Benny

 

[MyDaughters20JL]

I added a replacement connector for the fog lamp side above but what you would need is a new fog lamp harness as the chassis side pigtail is not available. If you would like a price on the harness I would need to know what style bumper you have. Sport, Sahara style with accents or Metal Rubicon style.

Thanks,
- Benny

without an image to campare to, I really don't know...I"m thinking I need an H16 to deutsch connector (for my aftermarket bumper & fogs) and an h16 to double deutsch for my daughter's aftermarket bumper & fogs

 

[AllMoparParts.com]

without an image to campare to, I really don't know...I"m thinking I need an H16 to deutsch connector (for my aftermarket bumper & fogs) and an h16 to double deutsch for my daughter's aftermarket bumper & fogs

I am sorry but we do not have dimensions or images showing the harness's extended. I dont think the harness's would differ much except for mounting points as the lamps on these models are all in a similar location.

- Benny

 

[BruceA78]

What about the fender clips that always break when taking the fender off. I believe the part # is 68526185AA

 

[AllMoparParts.com]

Added , Thanks

 

[ALRUI]

Creating this thread for commonly used and replaced hardware , fasteners and clips. Note all Hardware is sold individually.

Door Trim Panel clips
https://parts.allmoparparts.com/oem-parts/mopar-push-pin-6510359aa

Tailgate Trim Panel clips
https://parts.allmoparparts.com/oem-parts/mopar-clip-6511829aa

Front & Rear Flare attaching "W" style clips
https://parts.allmoparparts.com/oem-parts/mopar-w-type-clip-68526185aa

Fog Lamp Pigtail (connector replacement)
https://parts.allmoparparts.com/oem-parts/mopar-wiring-68087933aa





Feel free to post requests below


Thanks,
- Benny

Great information, thanks! Any part numbers for the various clips that hold things like the dash parts in, like:
Instrument Panel Bezel - Mopar (6CB81TX7AD)
and this:
Instrument Panel Bezel - Mopar (6CB71TX7AF)

 

[AllMoparParts.com]

Hi,
The only IP related clip we have come to identify is 6510407AB which looks like this

Please let me know if you have any questions.
Thanks,
-Benny

 

[Eyeball]

@AllMoparParts.com Any chance you can steer me towards the part number for the screws that hold the trim above the doors to the roll bar on a 2023 JLU?

I know I can just go to the hardware store and buy screws bit having a mix of Phillips head with the factory Torx will drive me nuts.

 

[AllMoparParts.com]

@AllMoparParts.com Any chance you can steer me towards the part number for the screws that hold the trim above the doors to the roll bar on a 2023 JLU?

I know I can just go to the hardware store and buy screws bit having a mix of Phillips head with the factory Torx will drive me nuts.

Hi,
Im pretty sure these are it
https://parts.allmoparparts.com/oem-parts/mopar-tapping-screw-6104575aa

I'll send a code you can use,
- Benny

 

[TKL223/3]

Thank you

 

[niJL]

Any chance you have the part # for the Christmas tree clips that hold the seat cover to the frame of the seat for the bottom cushion on the front seats. I believe 4 on one side and 3 on the other. Also, the Christmas tree clips with a zip tie that hold the wiring in under the seat.

 

[AllMoparParts.com]

Hi Brandon,
I dont see any listed but I may be able to find something that works if you have a pic or dims of it

- Benny

 

[niJL]

Hi Brandon,
I dont see any listed but I may be able to find something that works if you have a pic or dims of it

- Benny

The Christmas tree clips are covered by the fabric without the seat disassembled so I can't get a picture, but they press into this part on one side, not sure if that's of any help. PN# 68382500AA

Sponsored