Sponsored

Remove back side of the center console?

volcankaw

New Member
First Name
louie
Joined
Jun 30, 2020
Threads
1
Messages
3
Reaction score
1
Location
puerto rico
Vehicle(s)
2019 jeep wrangler jl
hello to all
can anyone tell me how to remove the back side of the center console on a 2019 jeep wrangler sport
i need to install an extra usb and i cannot figure out how to remove it
thanks in advance
Sponsored

 

Rhinebeck01

Well-Known Member
Joined
May 9, 2018
Threads
155
Messages
11,983
Reaction score
17,309
Location
Multiple places..
Vehicle(s)
'18 JL Rubi, '22 Prevost M H3-45,'01 Harley FatBoy
@volcankaw Watch this video in it's entirety... you will see.. Take note of the 2 bolts in upper inside of console you remove.

 

Rhinebeck01

Well-Known Member
Joined
May 9, 2018
Threads
155
Messages
11,983
Reaction score
17,309
Location
Multiple places..
Vehicle(s)
'18 JL Rubi, '22 Prevost M H3-45,'01 Harley FatBoy
thank you will try tomorrow
@volcankaw After you remove the bolts and you go to pull the back plastic off the console, DO pull straight back by grabbing both sides of the plastic at the same time and pulling very firmly straight back. Do not pull at an angle, say pulling hard on only one side. IF you do this you risk breaking/damaging the male fitting(s) that holds the white clip that holds the black panel on. When you go to reinstall push firmly and straight back and not at an angle so you do not damage the males that hold the white clips. CAREFUL when plastic comes off, because white clip, one or more might go flying and they are easy to lose. If you lose, you can buy here: https://www.amazon.com/gp/product/B07BFKBD13/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
 
OP
OP

volcankaw

New Member
First Name
louie
Joined
Jun 30, 2020
Threads
1
Messages
3
Reaction score
1
Location
puerto rico
Vehicle(s)
2019 jeep wrangler jl
@volcankaw After you remove the bolts and you go to pull the back plastic off the console, DO pull straight back by grabbing both sides of the plastic at the same time and pulling very firmly straight back. Do not pull at an angle, say pulling hard on only one side. IF you do this you risk breaking/damaging the male fitting(s) that holds the white clip that holds the black panel on. When you go to reinstall push firmly and straight back and not at an angle so you do not damage the males that hold the white clips. CAREFUL when plastic comes off, because white clip, one or more might go flying and they are easy to lose. If you lose, you can buy here: https://www.amazon.com/gp/product/B07BFKBD13/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
thank you will try tomorrow
Sponsored

 
 



Top