redline tuning hood struts

[Redline Tuning]

I ground down the screw head and left the metal grommet in place and that works as well.

Nice, that works as well. ?

Sponsored

 

[COKENOGOOD]

does anyone know this will work on RHD version as well?

I think we have the hood that made of steel, US version is made of aluminium..Dunno if any other differences.

 

[Rhinebeck01]

does anyone know this will work on RHD version as well?

I think we have the hood that made of steel, US version is made of aluminium..Dunno if any other differences.

@Redline Tuning will see my tag, and they will read your post.

Their offering should be a go with your RHD, JL. You will need to be sure what hood you have, so you get the correct hood lift struts. Have you checked the hood with a magnetic?

 

[roobies]

@Redline Tuning will see my tag, and they will read your post.
It's Sunday so give them a day or so and they will reply here..

? its sunday? why am I at work ??

 

[Redline Tuning]

does anyone know this will work on RHD version as well?

I think we have the hood that made of steel, US version is made of aluminium..Dunno if any other differences.

Yes, our systems will work with RHD Wranglers as well. We have a system specifically for "export" hoods as they are made of steel and obviously heavier than the US Aluminum hoods. All the mounting hardware is the same, however the gas springs are a little stronger to lift the heavier steel hood. The links for the "Export" hood are below:

Since this is a 392 forum, I would also like to point out that we have a system SPECIFICALLY for the 392 hood only. The 392 is unique in that it is steel, but also has a lot of plastic air intake cladding that adds to the weight of the hood. The links below are NOT for the 392 hood.

QuickLIFT PLUS (Mojave Edition and ALL Outside North America)
https://www.redlinetuning.com/product-p/21-20006-02.htm

QuickLIFT ELITE (Mojave Edition and ALL Outside North America)
https://www.redlinetuning.com/product-p/21-20006-03.htm

 

[COKENOGOOD]

@Redline Tuning will see my tag, and they will read your post.

Their offering should be a go with your RHD, JL. You will need to be sure what hood you have, so you get the correct hood lift struts. Have you checked the hood with a magnetic?

Thank you
yes, tested it with magsafe..

 

[COKENOGOOD]

Yes, our systems will work with RHD Wranglers as well. We have a system specifically for "export" hoods as they are made of steel and obviously heavier than the US Aluminum hoods. All the mounting hardware is the same, however the gas springs are a little stronger to lift the heavier steel hood. The links for the "Export" hood are below:

Since this is a 392 forum, I would also like to point out that we have a system SPECIFICALLY for the 392 hood only. The 392 is unique in that it is steel, but also has a lot of plastic air intake cladding that adds to the weight of the hood. The links below are NOT for the 392 hood.

QuickLIFT PLUS (Mojave Edition and ALL Outside North America)
https://www.redlinetuning.com/product-p/21-20006-02.htm

QuickLIFT ELITE (Mojave Edition and ALL Outside North America)
https://www.redlinetuning.com/product-p/21-20006-03.htm

Great. Thank you for the prompt reply.
Going to add it under my hood.

Sponsored