Rebel Off Road JL Build

[RebelOffRoad]

Here's an update on the JL Build, sorry for the delay!


Pallet full of parts, let the fun begin!

Drilling out and bolting up the rear lower shock brackets.

All ready to receive the King Coilovers, grade 8 hardware, because stronger is better.

Front lower shock mounts all bolted up and ready to go.

Front upper shock mount and King Shocks hydraulic bumpstop all set up!

Check back soon for another update!

Sponsored

 

[RebelOffRoad]

Rear lower shocks mounts all done.

Front upper shock bracket and King Hydraulic bump stop good to go.

Rear upper shock mount bolted on.

Custom rear bumpstop housing welded on and ready to go!

 

[MojitoWrangler]

I spy the new Genright bumpers

 

[RebelOffRoad]

Front coilover installed.

Rear coilover installed, minus the coil.

Proper spring selected and installed.

Stretching out and flexing the new legs.

 

[AZCrawl]

How much wheel travel are you getting at each corner?

 

[RebelOffRoad]

How much wheel travel are you getting at each corner?

Total wheel travel depends on the shocks used. With the 2.5 King Coilovers on our Recon kit, we get 12" of wheel travel up front and 14" in the rear. With our shop flex test, we were able to get 35" of articulation from the axles.

 

[overland-equipt]

What's the skinny on the rack? Is this something already in production or coming into production? Looks fun.

 

[RebelOffRoad]

What's the skinny on the rack? Is this something already in production or coming into production? Looks fun.

They are for sale! They're in production and we are working to get them up on our website. Please also feel free to call in and place an order over the phone.

Rebel Off Road
866.900.8841

 

[xpsruler]

They are for sale! They're in production and we are working to get them up on our website. Please also feel free to call in and place an order over the phone.

Rebel Off Road
866.900.8841

How do they mount to the roof? Looks like a very interesting setup.

 

[RebelOffRoad]

How do they mount to the roof? Looks like a very interesting setup.

We have this one mounted to the factory cage using custom brackets (that we'll be offering in the near future). It can also be mounted to the factory hardshell using a variety of slide tracks.

 

[pm3435]

Give us a call on Monday and ask to speak with Taylor our Sales Manager. He can should be able to let you know what will work. Right now the Mopar 2” kit is available. Taylor’s can be reached at 866-900-8841 or by email at [email protected]

We just put 35s on this JL today with no lift. No cutting. Just wheels and tires. However it was a Rubicon.

Give us a call on Monday and ask to speak with Taylor our Sales Manager. He can should be able to let you know what will work. Right now the Mopar 2” kit is available. Taylor’s can be reached at 866-900-8841 or by email at [email protected]

We just put 35s on this JL today with no lift. No cutting. Just wheels and tires. However it was a Rubicon.

whats the offset on the wheels?

 

[RebelOffRoad]

whats the offset on the wheels?

42mm, They're KMC XD820 Grenades

 

[cobaltblu10]

Looking great. I bought a set of fuel wheels that look almost identical to the one on your setup.

Sponsored