Raceline Monster Beadlocks on a Daily Driver

[Jeepin_Donnie]

37” STT Pros and I run 32-35psi.

Thanks! I appreciate the feedback!

Sponsored

 

[UNC Rubicon]

Thanks for your response! The instructions sheet that came with the wheels said no more than 25 but that’s a little low. I’ve been running mine at 28 cold. So they get to around 30 when driving.

I had that exact question/concern when reading the instruction sheet. The warning for max of 25psi is for setting the inner bead.

 

[Jeepin_Donnie]

I had that exact question/concern when reading the instruction sheet. The warning for max of 25psi is for setting the inner bead.

I used to run 31 cold before installing the Raceline wheels. So it's cool to up my PSI? Did you install your TPMS sensors? Have you had any issues with them? Thank you for your input with everything!

 

[UNC Rubicon]

I used to run 31 cold before installing the Raceline wheels. So it's cool to up my PSI? Did you install your TPMS sensors? Have you had any issues with them? Thank you for your input with everything!

Yes, you are fine increasing your PSI. No TPMS sensors for me. I was not able to salvage my others, so I’m running sans sensors.

 

[Jeepin_Donnie]

Yes, you are fine increasing your PSI. No TPMS sensors for me. I was not able to salvage my others, so I’m running sans sensors.

Thanks!

 

[Jteakus]

What offset are you guys running?
Are center caps available for the Monsters on a JL?
Thanks in advance

 

[UNC Rubicon]

What offset are you guys running?
Are center caps available for the Monsters on a JL?
Thanks in advance

4.75in backspacing with 0 offset.

Center caps are available but are extra.

 

[Jteakus]

What size tire are you running and how far out of the flare are they hanging? Sorry for all the questions, trying to get an idea of what will be best for my Jeep

 

[UNC Rubicon]

37x12.50 STT Pros. I’ll take a picture in a few minutes.

 

[Jteakus]

Thanks
I appreciate the help

 

[UNC Rubicon]

Well, I completely forgot to take a picture before I went to work. This is the best I have for now. If you need more, just lemme know.

 

[Jteakus]

Yessir, I like that

 

[UNC Rubicon]

Here are a couple more.

 

[Jeepin_Donnie]

Hi All,

Another question please. So I've had the wheels installed for almost 3 months now. The wheels are starting to become cloudy and discolored. Also I had my Jeep parked for a few days, it rained, and the puddles of trapped water also stained the wheels. Did they not clear coat the wheels?! Are you guys experiencing similar issues? Please let me know. Thanks!

 

[Jeepin_Donnie]

FYI all, Raceline's Monster beadlocks, if not powder coated, are raw aluminum. I was surprised when I called Raceline and was told this. This is why my wheels are becoming discolored. They let me know who to treat and protect them going forward.

Sponsored