Push pins for Mopar matte black grille 82215114

[DavdMc]

Does anyone have the part number for the 4 push pins that come with the matte black grille kit (for replacing those from the foam pads)?

Also, the part numbers for the 6 push pins that you remove from the top of your existing grille and the 2 that you remove from the grille surrounds?

Thanks in advance

Sponsored

 

[Jay 13]

Also If you Google or go on Amazon…it will bring up a large assortment of a bunch of these you can buy, including a remove tool for a pretty cheap price.

 

[DavdMc]

Thanks so much.

For further clarification, 06030441 is for the foam pads and 6503598 are for both the top of the grille and the surrounds?

 

[SH556JL]

Alternatively, you can order the Bolt hood lock. It will come with some spares if you would like to do that upgrade at the same time.

 

[Jay 13]

Thanks so much.

For further clarification, 06030441 is for the foam pads and 6503598 are for both the top of the grille and the surrounds?

Yes. When I did mine I just ended up purchasing a large batch of the assortment off Amazon as I also needed a proper tool to remove existing ones.

as for the “grille surroundings” those are meant to be used and transferee over from our existing grille.

For the record tho, the 6 pushpins can also be used again from the oem grill as long as you don’t break those. Even your diagram shows that you put them aside to be used again.

I chose to have extras just incase which is also another reason I bought the set with the tool from Amazon.

TL;DR Yes those are the 2 push pins you need. #6503598 x (6)
#0603441 x (4)

Sponsored