palumbum
Well-Known Member
- First Name
- Alex
- Joined
- Sep 10, 2019
- Threads
- 6
- Messages
- 121
- Reaction score
- 31
- Location
- Charlotte. NC
- Vehicle(s)
- 2016 Jeep Renegade Sport
Sponsored
Alright thanks. And then do I just yank these plastic pins out with pliers?20 and 21 are right (Passenger) side according the the wiring diagram. That's how I wired mine.
Okay thanks just saw them use a staple to do it. Looks like I have to call it quits for the night. Can’t seem to get the black piece off, what’s the best way to do that?25 an 26 are the drivers side, You will have to pop that black plastic separator loose and slide it back far as you can and do the same for the light blue seal under that. To release that plastic pin you will need to use a fine wire ie: small paperclip, to release it from the other side. There is a hole under the spot for the pin that is to release the pin. Google youtube on releasing Molex pins for info.
Gregj
ETA: there is a red plastic cover on the other side that pops out too to release the pin blanks so you can insert the wires.
thanks guys. I’m going to get back at it tomorrow and hopefully take some pics to help other Sport owners. I’d rather my frustrations help other people go quicker! I’m going to try and pop off that black piece and continue the install on my lunch break. Hopefully it’s 1, 2, 3I just pried up on it from the short side and it popped off. Sorry, I'm at work and can't get pictures of mine to help.
Gregj
I did my last night and just connected #25/26 to door #15/16 with 2 wires.Alright red cover is off and blue and black are up. I can’t seem to figure out how to pop the plastic out. I’m using a paper clip and watching videos online. Can anyone offer assistance here?
di it work? Oddly the connections according to the diagram are:I did my last night and just connected #25/26 to door #15/16 with 2 wires.
I mean from male 25/26 to female 15/16
How’d you get in the door harness for 15/16? Embarrassed to admit it but I went at it for 45 minutes and ended up bending both wires at the end. The angle is so tough and those wires have no give and there are so many around 15 and 16.I did my last night and just connected #25/26 to door #15/16 with 2 wires.
I mean from male 25/26 to female 15/16