Pro Comp Wheels on Non Rubicons

[MyJlU]

Looking to see Pro Comp Wheels on Non Rubicon JL's!!! Help me spend my money!!!!

Sponsored

 

[Therby]

Called the predator i think. They must be discontinued or will be because they keep getting cheaper and cheaper.

17x8.5 0offset 315/70r17

Painted the lip to match jeep

 

[ChrispyJL]

I like the Rockwells a lot, however Pro Comp wheels are a bit on the heavy side @ 35 lbs.

 

[MyJlU]

Great Start Keep It going!!!!

 

[PadreFreddie]

Called the predator i think. They must be discontinued or will be because they keep getting cheaper and cheaper.

17x8.5 0offset 315/70r17

Painted the lip to match jeep

Hey brother, I like the stance on your JL, do you have any type of lift kit? If you don't, do the 35's rub at all? Thanks!

 

[bartscrc]

Pro Comp Prodigy Wheels with Milestar Patagonia Tires 315/70r17 - no rubbing without a lift while on terribly paved roads. Will be installing 2.5 inch lift to be able to offroad properly though.

 

[mr187]

Procomp 32 series 17x9 on Patagonia's 315/70/17

 

[Therby]

Hey brother, I like the stance on your JL, do you have any type of lift kit? If you don't, do the 35's rub at all? Thanks!

Yeah, thanks! . Its a base JL with JLUR springs and shocks. About 1,75” lift. Added 1” bumpstops. Works perfect with sway bar disconnected

Also i think these wheels were 28lbs fyi for the guy above

 

[PadreFreddie]

Yeah, thanks! . Its a base JL with JLUR springs and shocks. About 1,75” lift. Added 1” bumpstops. Works perfect with sway bar disconnected

Also i think these wheels were 28lbs fyi for the guy above

Thanks!

 

[ChrispyJL]

FYI, the Predators are on 25% sale on 4wheelparts.com
as well as some other pro comp wheels

5 Predators in 17x8.5 5on5 with 0 offset was $474...wish I could pull the trigger, I like those, if they are on sale still next week I am going for it..

and they are 28 lbs? I saw 35lbs somewhere, but maybe that was just the rockwells or my brain farting on itself who knows

 

[Punk'n2doorsport]

Called the predator i think. They must be discontinued or will be because they keep getting cheaper and cheaper.

17x8.5 0offset 315/70r17

Painted the lip to match jeep

Did you try 16s? I have might be able to snag a set of 16s with 2 inch backspacing think they will fit?

 

[Therby]

Did you try 16s? I have might be able to snag a set of 16s with 2 inch backspacing think they will fit?

I did not, would be pretty tight. Ive seen a few fit i believe.

16s are good for saving money on tire and a little more sidewall. But to find a good tire that fits on a 16 that isnt E load doesn’t really exist. You can get 35” tire for 17” wheel in D and even some C load which a nicer for a light 2dr

 

[tommyboyii]

Hope this gives more options.

Pro Comp 7069's. Matte Black. 17x9. 4.75 backspace. Here they are on Stock suspension. Tires 285/70/17 BFG KO's c-load (get c-load in any size tire for my 2 cents). FYI - the backup camera fits these wheels same as stick.

https://www.4wheelparts.com/p/pro-c...lack-alloy-wheels/9300?Style_PQMS=Series+7069

I recently had the 2 inch BDS suspension lift kit installed. I stuck with their nitro shocks. Ride is top-notch thus far (approx. 2 weeks in).

http://bds-suspension.com/product?ma=7&mo=32&ty=110&yr=2018-2019

For what its worth......if you are looking for a non-OEM soft top go with the Bestop Trektop NX ( I went the "low end" Black Diamond; still very substantial weight). Excellent value and it was a breeze to install. It is pure simplicity to use; you only need flip the 2 latches to open up the front cabin; and it takes all of 3-4 minutes to remove the back side panels and the rear angled back window for a bikini top.

These are pre-lift.....

 

[ChrispyJL]

@tommiboyii can you put up a pic down the side to show poke pretty please.

also did anyone get hub centric rings? JL hub bore is 71.5 and the pro comps have a 108mm bore, I have gotten hub centric rings in the past, just wondering if they are beneficial or if I can skip them.
can't find anything verifying the hub bore on the pro comp wheels

 

[tommyboyii]

Here you go. This was just after install. 4.75 inch back space. offset is -6. Just a shade outside the fenders.

Here is with the stubby bumper. RedRock 4x4 Attack. purchased through extreme terrain website.

it took about an 60-80 minutes for the install (the removal of the factory bumper.......mainly the annoying clips that held in the OEM fog lights.......is the tedious part).

Sponsored