Post pics of your Rubicon on 35s no lift

CaddyshackGopher

Well-Known Member
Joined
Apr 14, 2018
Messages
241
Reaction score
214
Location
North Dakota
Vehicle(s)
2019 Sting Gray JLUR
Vehicle Showcase
1
I thought so too, but since my earlier post, I've added the Teraflex 1.5" lift. That gave me back the gap in the wheel wells that I lost going to 35's.
I have no intention of going any higher, as it's my daily and a little bit of a stretch for me to now to climb in.

20180930_122757.jpg
17x9 Mammoth Boulders?





Advertisement

 

JIMBOX

Well-Known Member
First Name
JAMES
Joined
Feb 19, 2018
Messages
1,701
Reaction score
1,641
Location
FERNLEY NV
Vehicle(s)
2018 HELLAYELLA JLU SAHARA/2016 "STINGER YELLOW" RAM
2DR RUBICON--stock suspension-

LT315/75x16 MT/ProComp 16x8 CLASSIC POLISHED--
SUNP0230_zps5mj7r3kq.jpg

SUNP0225_zpsipkvcmlt.jpg

SUNP0232_zpspponjx27.jpg

SUNP0227_zpsvwtljyma.jpg


W.E.

JIMBO
 

Andy2434

Well-Known Member
First Name
Andy
Joined
Dec 4, 2017
Messages
850
Reaction score
974
Location
Las Vegas/San Francisco
Vehicle(s)
'19 Billet JLUR, '20 Mustang GT, 6MT
Occupation
Retired/Leisure
They measure 17x8.5 with 5.2in Backspace (+10 offset)
I have been looking at the Quadratec 41 w/ BFG 315/70R17 KO2s. Have you experienced any offroad clearance issues? How does your set-up mount onto the stock tire carrier?
 

JIMBOX

Well-Known Member
First Name
JAMES
Joined
Feb 19, 2018
Messages
1,701
Reaction score
1,641
Location
FERNLEY NV
Vehicle(s)
2018 HELLAYELLA JLU SAHARA/2016 "STINGER YELLOW" RAM
I use a set of HANKOOK DYNAPROLT 315/75X16MT ON MY PROCOMP ALLOY 16X8 WHEELS and using the spare tire mount/w 30psi in the tires --

The tire fits/w a "BRUSH" PUSH---ON THE STOCK STEEL BUMPER-which is GREAT !

SUNP0232_zpspponjx27.jpg


W.E.

JIMBO
 

CaddyshackGopher

Well-Known Member
Joined
Apr 14, 2018
Messages
241
Reaction score
214
Location
North Dakota
Vehicle(s)
2019 Sting Gray JLUR
Vehicle Showcase
1
I use a set of HANKOOK DYNAPROLT 315/75X16MT ON MY PROCOMP ALLOY 16X8 WHEELS and using the spare tire mount/w 30psi in the tires --

The tire fits/w a "BRUSH" PUSH---ON THE STOCK STEEL BUMPER-which is GREAT !

SUNP0232_zpspponjx27.jpg


W.E.

JIMBO
I didn’t think 16” wheels fit on Rubicons!
 

JIMBOX

Well-Known Member
First Name
JAMES
Joined
Feb 19, 2018
Messages
1,701
Reaction score
1,641
Location
FERNLEY NV
Vehicle(s)
2018 HELLAYELLA JLU SAHARA/2016 "STINGER YELLOW" RAM
Thanx--

16" wheels will fit, but-

You need at least 4" back space, so the balance weights don't touch the CALIPERS--there's about 1/4" clearance between the rim and CALIPER--AT THE INSIDE RIM EDGE, BUT LESS THAN 1/8: CLEARANCE 3": IN, TOWARD THE RIM MATING FACE--

Good luck

JIMBO
I didn’t think 16” wheels fit on Rubicons!
Looking good!
 

Advertisement




 



Advertisement
Top