mgroeger
Well-Known Member
- First Name
- Mike
- Joined
- Feb 1, 2018
- Threads
- 151
- Messages
- 5,486
- Reaction score
- 7,889
- Location
- Hurricane, UT
- Vehicle(s)
- 2021 JLUR 2.0T, 1991 YJ rock crawler
- Occupation
- I make microchips for a living.
- Vehicle Showcase
- 1
- Thread starter
- #1
I noticed that my plastic cover over the fender vent was not flush. It appeared a tab was pushing against the fender metal where it seemed like a slot would be to accommodate the tab so the plastic would lay flush.
I mucked with it and purposefully broke the tab off but another part of the plastic was messed up so it didn't work.
It appears it is a plastic cover and then it has a bezel around it which is not sitting flush. This is the last thing in the world I would take it to a dealer for because my expectation would be scratched paint and having to wait for a new piece. I generally don't trust dealers to work on my cars as most of them don't give a rip.
Regardless, has anyone figured out how to pop this piece off? I fear i will need to take the inner fender liner off to get to it.
I mucked with it and purposefully broke the tab off but another part of the plastic was messed up so it didn't work.
It appears it is a plastic cover and then it has a bezel around it which is not sitting flush. This is the last thing in the world I would take it to a dealer for because my expectation would be scratched paint and having to wait for a new piece. I generally don't trust dealers to work on my cars as most of them don't give a rip.
Regardless, has anyone figured out how to pop this piece off? I fear i will need to take the inner fender liner off to get to it.
Sponsored