Pin kit for Hardtop plug (XY440a)

[crbrenny]

All, I am looking for information on how i can add pins into my Hardtop plug on the rear drivers side of the top. I don't have the power top so there are some missing pins and I was hoping to fill them in with a terminal and my own wire to tap 12V. I've done on older fords but unsure if Mopar/FCA sells that type of part. If not, is there any specific term i should be using to find 'universal' pins that fit?

Thanks in advance!

Sponsored

 

[crbrenny]

I’m working with an oem supplier and will have info on a couple weeks, for those that may. Be interested haha. I’m working on something a little different and if it works, I’ll write it up

 

[JLWranglerJL]

I can get you the part number for the pins and connector tomorrow.

 

[crbrenny]

I wound up buying the hardtop harness online for $14, and pulled out some of the pins and repurposed them haha.

 

[Mojito!]

I wound up buying the hardtop harness online for $14, and pulled out some of the pins and repurposed them haha.

Do have a pat number or link to the item? I am wanting to use the unused wires for the retractable roof for power.

 

[crbrenny]

Do have a pat number or link to the item? I am wanting to use the unused wires for the retractable roof for power.

Part number: 68368992AE

I did the same thing, I did it for the brawlee light, and added a switch into the wiper motor cover so it all removes easily with the hard top. I'm going to write it up separately into its own thread.

 

[tonygiotta]

Nice, I like it. All my wiring for the Brawlee is clean, but it would be cool to combine it into the hardtop plug.

Sponsored