Pics of oem Mopar Steel bumper with winch setup?

[kapk22]

Can some of you with the stock steel front bumpers post some pics with your winch setups please?

and list which winch you are running

Advertisement

 

[Aonar]

I am going to follow because I am planning on getting a Badland Apex Syn 12000 winch. Hoping to see what plate others are using on their stock steel bumper.

 

[kapk22]

I am going to follow because I am planning on getting a Badland Apex Syn 12000 winch. Hoping to see what plate others are using on their stock steel bumper.

nice!! I haven’t researched plates or even winches much yet. I originally wanted to get the rough country bumper with the integrated LED, but I really liked the looks of the stock steel bumper. I stumbled on a local listing for one and picked it up for $150. Couldn’t pass it up.

 

[DuRsT]

Added the Warn low bar also.

 

[Quadjeeper]

Warn VR8 with synthetic rope.

 

[limeade]

Warn VR EVO 10-S winch, Warn mounting plate, with Maximus-3 SLP hoop

 

[St0rmy]

warn zeon platinum 12

 

[RagTopDeluxe]

Warn Zeon 10S on the Warn plate. Mopar guard.

It was a pita to install.

 

[Gadgettr1]

Warn Zeon 10S, Maximus-3 mounting plate, classic loop, trim plates and JL tow loops (with Smittybuilt shackles in them).

 

[sanman357]

Warn mount, Smittybilt 12k winch, Factor 55 fairlead, Flatlink E

 

[Chocolate Thunder]

Smittybilt X20 12K synthetic line, Rusty’s plate., RockHard bumper hoop.

 

[Vinman]

Warn 9.5 TI on a Warn plate but new mounting holes drilled about 5/8” closer to the drivers side. The winch in slightly offset but works as needed.

 

[MarkY3130]

Not the most direct picture of the winch, but this shows a Warn EVO VR 10-S, Warn EVO winch cover, Warn bumper hoop, and KC Gravity Pro-6 lights with amber covers mounted to a poison spider fairlead mount.

 

[Headbarcode]

Warn VR EVO 10-S winch, Warn mounting plate, with Maximus-3 SLP hoop

What are your thoughts on the VR Evo 10s and mounting plate? I've been eyeballing that setup. Also, I was beginning to think no one else had this bull bar.

 

[JoeValkIS]

Here is mine...

Trimmed the filler plate...

This is the winch...

Used the Maximus-3 JL Winch Plate...

And Tuffy 333-01 Flip-Up License Plate Holder for Hawse Fairleads...slightly modified so the hook would fit under it...