chevymitchell
Well-Known Member
- First Name
- Shawn
- Joined
- Feb 18, 2018
- Threads
- 94
- Messages
- 4,268
- Reaction score
- 10,228
- Location
- K-ville, NC
- Vehicle(s)
- 2019 JLUR (Pain Train), 2022 2500 AT4
- Occupation
- Avi Engineer
- Thread starter
- #1
2019 JLUR 3.6L, Auto, XD60/80, Coilover Longarm, RIPP Blower, PSC, Racelines, STT Pros, Dual Battery, RPM Steering, Steersmarts Trackbars, Artec Skids, Olivers Drivershafts.
42,400 Miles
Pain Train is an insurance buy-back where it was hit in the wheel and then tipped over.
The rear trackbar bolt was pushed through the bracket (zero frame damage of any kind) and the factory sport bar was bent in the back.
The parts alone I have put into this Jeep in the last year are over $56K. This does not include labor or the Jeep itself.
The title is branded Salvaged/Rebuilt, but it is in my name with no lien so a straight transfer would be clean and easy. No extra title work to get it insured or anything like that.
The good part... none of these parts or the Jeep have been off-road since being installed. Everything you see has about 4 miles on it from me driving it in my neighborhood.
I've lowered the labor cost on the sale to $60 per hour since everything listed has been installed and ready to wheel. (Minus alignment). I've done the install and work myself.
What it needs - Cage, Fenders, Bumpers, Passenger Side doors (my plan was to go half doors), rear quarts are dented, alignment, air compressor, and you'll need a top. I have a $500 deposit down on the Genright cage now and since I was a pre-order, you would get the cage options for free. Cages should be shipping this month. I have every interior piece and hardware.
Why am I selling it - This has been a labor of love for me for 53 weeks. I'm jumping feet first into another opportunity and I have a ton of cash wrapped up in this project that I need access to. That's the only reason.
The trackbar brackets have been upgraded to 3/16" steel. The Long Arm is the EVO-242BA kit. All very serious equipment.
Dynatrac XD60/80 axle set. (I waited 214 days for these.) 5.38, Air Lockers
The price - $80K FIRM. Will deliver anywhere from Colorado East for FREE. OR
$60K + $20k in Trade Value. Open to offers. (Cars, ATV's, Side by Sides, etc...)
Pay for the Parts and Labor, get the Jeep for $18k. Title in hand. All receipts available. Everything installed has a warranty and I have personally installed every part.
Original Sticker is here: https://www.jeep.com/hostd/windowsticker/getWindowStickerPdf.do?vin=1C4HJXFG0KW502584
42,400 Miles
Pain Train is an insurance buy-back where it was hit in the wheel and then tipped over.
The rear trackbar bolt was pushed through the bracket (zero frame damage of any kind) and the factory sport bar was bent in the back.
The parts alone I have put into this Jeep in the last year are over $56K. This does not include labor or the Jeep itself.
The title is branded Salvaged/Rebuilt, but it is in my name with no lien so a straight transfer would be clean and easy. No extra title work to get it insured or anything like that.
The good part... none of these parts or the Jeep have been off-road since being installed. Everything you see has about 4 miles on it from me driving it in my neighborhood.
I've lowered the labor cost on the sale to $60 per hour since everything listed has been installed and ready to wheel. (Minus alignment). I've done the install and work myself.
What it needs - Cage, Fenders, Bumpers, Passenger Side doors (my plan was to go half doors), rear quarts are dented, alignment, air compressor, and you'll need a top. I have a $500 deposit down on the Genright cage now and since I was a pre-order, you would get the cage options for free. Cages should be shipping this month. I have every interior piece and hardware.
Why am I selling it - This has been a labor of love for me for 53 weeks. I'm jumping feet first into another opportunity and I have a ton of cash wrapped up in this project that I need access to. That's the only reason.
The trackbar brackets have been upgraded to 3/16" steel. The Long Arm is the EVO-242BA kit. All very serious equipment.
Dynatrac XD60/80 axle set. (I waited 214 days for these.) 5.38, Air Lockers
The price - $80K FIRM. Will deliver anywhere from Colorado East for FREE. OR
$60K + $20k in Trade Value. Open to offers. (Cars, ATV's, Side by Sides, etc...)
Pay for the Parts and Labor, get the Jeep for $18k. Title in hand. All receipts available. Everything installed has a warranty and I have personally installed every part.
Original Sticker is here: https://www.jeep.com/hostd/windowsticker/getWindowStickerPdf.do?vin=1C4HJXFG0KW502584
Sponsored
Last edited: