swimman
Well-Known Member
- Joined
- Dec 20, 2017
- Threads
- 27
- Messages
- 264
- Reaction score
- 194
- Location
- North Carolina
- Vehicle(s)
- 2019 JLUR
- Thread starter
- #1
Need some help. I'm installing my stock LED fog lights into my Smitty XRC Gen 2 bumper. However, I cannot remember the orientation of the light as it has a top side and a bottom side. if you look at the light from the front, each has a gray plastic piece inside the lens that goes horizontally. Should this piece be at the top or bottom of the light?
I believe it's at the top but positioned this way, I cannot adjust the light beam high enough. If this is the orientation, I'll need to get creative with some washers/spacers on the top mounting holes to get the beam higher. Before I do, I just want to make sure I have the lights positioned correctly.
FYI...I did look for pics with the stock fog lights but did not find any that solved this issue.
I believe it's at the top but positioned this way, I cannot adjust the light beam high enough. If this is the orientation, I'll need to get creative with some washers/spacers on the top mounting holes to get the beam higher. Before I do, I just want to make sure I have the lights positioned correctly.
FYI...I did look for pics with the stock fog lights but did not find any that solved this issue.
Sponsored