WarlockLord
Member
Yes, both mirror and ORP are working.That is awesome to hear I’m still fighting trying to get my off-road pages working as well. So your mirrors is now working
Sponsored
Yes, both mirror and ORP are working.That is awesome to hear I’m still fighting trying to get my off-road pages working as well. So your mirrors is now working
Defiantly I treated in working with em to get my off-road pages workingWorked with Joe from Z automotive on enabling the icon on the uconnect. He knew exactly what needed to be done and programmed mine using a bcm flash. He said it would be easy to incorporate into a future release. He also enabled off road pages on my self upgraded uconnect 8.4.
does that mean with the new tazer update you can activate offroad pages ?Looks like the beta is up on Zauto's web page for download. Works for me. Offroad Pages working.
Yes. You will need to download the beta firmware and update you tazer jl. Once I activated it in the jeep and did the reboot, the off road icon appeared on the uconnect. Everything works great. Now I'm just waiting for the auto dimming mirror update.does that mean with the new tazer update you can activate offroad pages ?
Cerberus, Have you noticed if your 4x4 indicator in the dash is working after activating the ORP? My ORP is working but the 4x4 indicator on the dash and on the ORP on the radio do not show 4x4 changes.Yes. You will need to download the beta firmware and update you tazer jl. Once I activated it in the jeep and did the reboot, the off road icon appeared on the uconnect. Everything works great. Now I'm just waiting for the auto dimming mirror update.
I just went out and checked. All of my 4x4 indicators are working correctly. The dash and the radio take a few seconds to change but do come on. I dont know if It makes a difference but i have the 6 speed manual.Cerberus, Have you noticed if your 4x4 indicator in the dash is working after activating the ORP? My ORP is working but the 4x4 indicator on the dash and on the ORP on the radio do not show 4x4 changes.
Yup I turned ORP off rebooted and turned it back on and rebooted. All is good in the world now and everything works great. So Happy. Also waiting on auto dim. But to be honest. I haven't needed to dim it at all. Rear tint is taking care of that.I just went out and checked. All of my 4x4 indicators are working correctly. The dash and the radio take a few seconds to change but do come on. I don't know if It makes a difference but i have the 6 speed manual.
Yes Sir.does that mean with the new tazer update you can activate offroad pages ?
Would love to talk to you about your processYes 8.4. I swapped the 8.4 in a few months ago from the 5”, my Jeep did not come with auto dimming mirror. But the radio always had the icon from when I installed it, just didn’t do any thing when I touched it. Once I installed the mirror ran the wires and touched the icon, the icon changed from white to orange and Auto-dimming works. Tested it with a light and on the road.
Did you take any pics of the process. I am about to do the same thing and I am so lost.Yes 8.4. I swapped the 8.4 in a few months ago from the 5”, my Jeep did not come with auto dimming mirror. But the radio always had the icon from when I installed it, just didn’t do any thing when I touched it. Once I installed the mirror ran the wires and touched the icon, the icon changed from white to orange and Auto-dimming works. Tested it with a light and on the road.
I didn’t take any pics of the mirror swap it was pretty straight forward. What questions do you have?Did you take any pics of the process. I am about to do the same thing and I am so lost.
Did it have to be activated before work and did you do any special wiringI didn’t take any pics of the mirror swap it was pretty straight forward. What questions do you have?
as I posted in my original post here: “The main issue was once the overhead harness was installed there were no wires in corresponding slots in the connector behind the Passanger side a pillar. (Yellow/Pink (Ignition switched) and a Orange/Violate (BCM)) check ur connectors behind the passanger A-pillar u should see these 2 on the over head harness plug but if u check the body side of the plug there not pinned. I added 2 pins and ran the wires to the Compass module (they share the same wires) and it’s now working on the radio etc. SOS and Assist buttons function too”Did it have to be activated before work and did you do any special wiring
Great info. Where do you get missing pins for the plugs?as I posted in my original post here: “The main issue was once the overhead harness was installed there were no wires in corresponding slots in the connector behind the Passanger side a pillar. (Yellow/Pink (Ignition switched) and a Orange/Violate (BCM)) check ur connectors behind the passanger A-pillar u should see these 2 on the over head harness plug but if u check the body side of the plug there not pinned. I added 2 pins and ran the wires to the Compass module (they share the same wires) and it’s now working on the radio etc. SOS and Assist buttons function too”