Non LED fog light harness

[Garbosrt4]

Picking up a 3 piece steel bumper today, used, has the LED fog light's but not the harness. My question is, will the Halogen fog light harness work/compatible with the LED fog lights? Or do I need to order a new harness? What is the part number?

Sponsored

 

[jludave]

My question is, will the Halogen fog light harness work/compatible with the LED fog lights? Or do I need to order a new harness? What is the part number?

The harness should work. I installed LED aftermarket fogs on my Sport Altitude, which came with halogen lighting. The fogs work with having to change anything.

 

[Garbosrt4]

The harness should work. I installed LED aftermarket fogs on my Sport Altitude, which came with halogen lighting. The fogs work with having to change anything.

Thanks, was it the same connector?

 

[hoag4147]

Picking up a 3 piece steel bumper today, used, has the LED fog light's but not the harness. My question is, will the Halogen fog light harness work/compatible with the LED fog lights? Or do I need to order a new harness? What is the part number?

Same harness. Works fine. I swapped over my Sport S plastic bumper halogen harness when I upgraded to 3 piece steel bumper. Took me longer to remove the stupid harness from old bumper then to install bumper

 

[jludave]

Thanks, was it the same connector?

Yes.

 

[Garbosrt4]

Same harness. Works fine. I swapped over my Sport S plastic bumper halogen harness when I upgraded to 3 piece steel bumper. Took me longer to remove the stupid harness from old bumper then to install bumper

Awesome, I thought I was going to have to buy a whioe new harness..

 

[Garbosrt4]

Awesome, I thought I was going to have to buy a whioe new harness..

Do you need any type of adapter, or is it plug and play? Thanks again.

 

[jludave]

Do you need any type of adapter, or is it plug and play? Thanks again.

Depends on the light. Typically, aftermarkets come with the required adapter. Either way, it’s essentially plug-and-play.

 

[Garbosrt4]

Depends on the light. Typically, aftermarkets come with the required adapter. Either way, it’s essentially plug-and-play.

It's stock halogen to stock LED.

 

[jludave]

It's stock halogen to stock LED.

Should be a straight swap.

However, for OEM LEDs, it’s my understanding that you’ll need a programmer to activate them.

Sponsored