Happened to me a few days ago. Trying changing audio sources on your radio, specifically choose AM then back to FM/XM/etc. Hope that works.So my sound worked last night. Now this morning...no sounds fom speakers...is it an update glitch? 2 days ago I lost my back up cam guidlines...then later that day they came back.
What's strange was that no other source worked for me until I chose AM. And that was 30 minutes later. Something tells me that it is a glitch. It happened after the last software update with the offroad page (which is now gone again for me). Who knows....Yeah, no source worked even the navigation.
After the 3rd time drove, it now works...maybe a fluke.
What radio do you have? The standard or the upgraded Alpine?Happened to me a few days ago. Trying changing audio sources on your radio, specifically choose AM then back to FM/XM/etc. Hope that works.
8.4 AlpineWhat radio do you have? The standard or the upgraded Alpine?
FWIW, there's no way I'm doing a factory reset... too many damn settings I'd have to remember to redo.Hello Mr. OldGuy,
To my immediate knowledge, I am not sure if there is another easier way to work around your issues.
There are a few troubleshooting steps that we may be able to try:
1) Put your vehicle into the accessories mode (ACC or RUN)
2) Hold down the Phone and voice recognition buttons, at the same time, for thirty seconds.
3) Let go of the buttons
4) Turn vehicle off
5) Open driver’s side door for thirty seconds (or until dash illumination goes black)
6) Close door
7) Restart vehicle
8) Let the radio load up and see if concern is still present
We can also perform a hard reset:
1) Press and hold the driver's side hot and cold buttons.
2) If a menu appears on screen, choose option "Restore To Factory Defaults"
3) Confirm choice.
4) Let the radio load up and see if concern is still present.
Those would be the most user-friendly options that I would advise you to attempt.
Nicolas
I just experienced this today. Tried the soft reset and the radio still didn't work. Then I switched it to AM and the speakers came back on. That is just loco.Happened to me a few days ago. Trying changing audio sources on your radio, specifically choose AM then back to FM/XM/etc. Hope that works.
I rebooted with my tazer then all was good.Same thing for me here, no sound for any system including even Siri. I did get beep of backup sensor. I switched through all the modes and inputs and also restarted vehicle several times. I started driving and then switch to AM and got static which meant all sound had returned and everything operated normal. Weird. We’ll see if it happens again - this thread can be a log of sorts.