New TPMS sensors part for 2021+ models?

[abecker]

I have a 2021 JLU sport S and just had 35’s put on. The installer used my factory sensors. When I got home I noticed that my tire pressure is no longer showing up on my dashboard. Any ideas how to get that back on my display?
thanks

If they used your factory sensors there should not be any issue. Do all tires show dashes or the actual screen with tire pressure sensors doesn’t show any more?

Sponsored

 

[Goin2drt]

I have a 2021 JLU sport S and just had 35’s put on. The installer used my factory sensors. When I got home I noticed that my tire pressure is no longer showing up on my dashboard. Any ideas how to get that back on my display?
thanks

Yep. Drop the PSI to 25. Go drive around the block. Come back and put them up to exactly the door placard 37 and then go drive again. Cheers.

 

[Lightguy]

I have a 2021 JLU sport S and just had 35’s put on. The installer used my factory sensors. When I got home I noticed that my tire pressure is no longer showing up on my dashboard. Any ideas how to get that back on my display?
thanks

I read on the JT forum some people had to restart the TPMS either by battery disconnect or with Tazer/Flashcal reset. I didn’t need to restart mine & I had new factory sensors from the dealer (I left the original ones in the wheels the Jeep came with).

 

[ODDs]

Hi guys, I bought a set of Schrader 29507's off of Amazon for our 2019 Wrangler. I took them to Discount Tire to swap into the 2021 wheels I had put on the Wrangler. But discount scanned the sensors prior to installing, and got no reading. So they didn't install them.

Do these sensors typically do this? Not scan before install, and then after a few miles get activated, or are my Amazon sensors just bad?

 

[Goin2drt]

Hi guys, I bought a set of Schrader 29507's off of Amazon for our 2019 Wrangler. I took them to Discount Tire to swap into the 2021 wheels I had put on the Wrangler. But discount scanned the sensors prior to installing, and got no reading. So they didn't install them.

Do these sensors typically do this? Not scan before install, and then after a few miles get activated, or are my Amazon sensors just bad?

Not bad just the wrong ones. 29093’s for a 2019. Also can use 20398 dc’d and don’t have tire fill alert but the work.

 

[mtjiang145]

Gary at tpmsbargains is great.
He told me the following parts is for builds before 6/2021. (not the right one for me)
https://www.tpmsbargains.com/2020-J...d-OEM-TPMS-Sensor-p/tpms-29117-03-jl-set5.htm

He told me the right part# 68339096AB is for Wrangler Sahara 4xe built after 6/2021.
The best method is call dealer, give them your VIN and ask for the up to date part#.

 

[Chainringtattoo]

Well I hope 68339096AB is the right part number for my September 21 Rubicon because they and Apex rapid deflators went into beadlocks yesterday. Unfortunately it will be a while before I know if they work since I'm still waiting on axles.

 

[jacllondon]

so to summarize I bought the schrader 29093. my build date is 11/20. Should i just put them on and are like plug and play or my jeep has to "relearn"? . if so, how the relearning works?

 

[abecker]

so to summarize I bought the schrader 29093. my build date is 11/20. Should i just put them on and are like plug and play or my jeep has to "relearn"? . if so, how the relearning works?

You just put them on and drive. The Jeep will detect them after a few minutes.

 

[jacllondon]

You just put them on and drive. The Jeep will detect them after a few minutes.

Well I hope so. The tire shop just called me and said they are not coming up on the dashboard. Is there any way to reset the whole thing?

UPDATE: it is working. As datapoint if can helps others I bought the TPMS from rockauto and build of my 2021 jl is 11/20

 

[abecker]

Well I hope so. The tire shop just called me and said they are not coming up on the dashboard. Is there any way to reset the whole thing?

did they drive with them and if so how far? One thing they could do is drop the PSI to about 25. Then fill it up exactly to 37. Then drive for about 10 mins and get it up to speed (over 45).

 

[john_cal]

Hey, does anyone know where to get the Conti sensors (68339096AB)? Seems like every place I call they are on backorder. Maybe someone has a set they would be willing to sell?

 

[abecker]

Hey, does anyone know where to get the Conti sensors (68339096AB)? Seems like every place I call they are on backorder. Maybe someone has a set they would be willing to sell?

Did you check quadratec? That is where I got mine.

 

[john_cal]

Did you check quadratec? That is where I got mine.

Yes, I ordered from them, but the backorder date keeps getting pushed back.

 

[BeachPilot74]

Yes, I ordered from them, but the backorder date keeps getting pushed back.

$32 per sensor? Just looked them up on Quad... Those are expensive! Is there an alternative?

Sponsored